Astm d 3800 pdf

ASTM Designation: D1250 API Standard L 2540 IP Designation: 200. CONTENTS Reduction of Volume to 60°F against API Gravity at 60°F Generalized Crude Oils * These factors are solely for conversion at the same temperature. † This relationship is exact by definition. ASTM D 1250-80. This ASTM Standard is about the practice of SG, CV and compressibility calculations 2. Referenced Documents 2.1 ASTM Standards: D 1717 Methods for Analysis of Commercial ButaneButene Mixtures and Isobutylene by Gas Chromatography 3 D 1945 Test Method for Analysis American Society of Testing & Materials (ASTM) provide a standardized method of calling out the required physical properties of a rubber product, based primarily on its Type and Class. Speci cations for physical properties of elasomeric seals can be very general or extremely speci c in nature. PDF | 13 different crude oils around the world pertaining to the low and high gravity, low and high sulphur grades were distilled by the use of boiling point distillation by application of ASTM D-7169 simulated distillation and combination of ASTM D-86 and ASTM D-1160 physical distillation methods. 1.1 This test method covers the determination of the tensile properties of unreinforced and reinforced plastics in the form of standard dumbbell-shaped test specimens when tested under dened conditions of pretreatment, temperature, humidity, and testing machine speed. 1.2 This test method is 4.4.1 ASTM No. 2 and No. 3 Oils have been replaced by IRM 902 and 903 Oils, respectively, under Practice D 5964. These Oils are similar but not identical 4.4.2 Substitutability of IRM 902 and 903 Oils for ASTM No. 2 and No. 3 Oils has not been established, as their swelling characteristics are different