80c51 instruction set definition

The instruction set for the Boolean processor is shown in Table 1-9. All bit accesses are by direct addressing. Bit addresses 00H through 7FH are in the Lower 128, and bit addresses 80H through FFH are in SFR space. The 8051 Instruction Set. 1.14 Instruction Definitions. CIP-51 Instruction Set Summary. Instructions in 1 or 2 system clocks. - Up to 48 MIPS operation. - Low Frequency (80 kHz) Internal Oscillator. - Can switch between clock sources on-the-fly Packages - 48-pin TQFP (C8051F380/2/4/6). Table 3-51. Chapter 5 — Instruction Set Reference, V-Z. Continues the description of Intel 64 and IA-32 instructions started in chapters 3 and 4. It provides the balance of the alphabetized list of instructions and starts Intel® 64 and IA-32 Architectures Software Developer's Manual, Volume 2C. B.5 Escape Opcode Instructions. Intel® Architecture Instruction Set Extensions. Programming Reference. Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. IA Instructions vs. Micro-ops. Some Important Definitions. 2 Mode/SubMode Introduction. 3 A (very) Brief History. 5 Intro to the IA-32 Ecosystem. 6 Instruction Set Expansion. 7 32-bit Machine Language Instruction Format. 8 Real Mode (8086 Emulation). SIMD Instruction Set Summary. Data Movement Instructions. Introduction/Chapter Objectives 51. 2-1 Internal Microprocessor Architecture 51 The Programming Model 52; Multipurpose Registers 54. 11-4 8254 Programmable Interval Timer 423 8254 Functional Description 423; Pin Definitions 424 CIP-51 Instruction Set Summary. instructions in 1 or 2 system clocks - Up to 25 MIPS throughput with 25 MHz clock - Expanded interrupt handler Memory - Up to 512 bytes internal data RAM (256 + 256) - Up to 16 kB Flash; In-system Pin Definitions for the C8051F80x-83x. Name GND. VDD RST/. 8. CIP-51 Microcontroller. 8.1. Instruction Set. 80 SFR Definition 8.1. The CIP-51 employs a pipelined architecture that greatly increases its instruction throughput over the stan-dard 8051 architecture. Instruction Set Definition (programming model). u Objects = architected entities = machine state. Full MIPS Instruction Set. add sub add immediate add unsigned subtract unsigned add imm. unsigned multiply multiply unsigned divide divide unsigned move from u Next lecture. w Addressing modes. 51. Instruction Set. 51. Data Transfer Instructions. OVERVIEW OF THE 80C186 FAMILY ARCHITECTURE During periods when the Execution Unit is busy executing instructions, the Bus Interface Unit sequentially prefetches instructions from memory. CIP-51 Instruction Set Summary. The CIP-51 is fully compatible with the MCS-51™ instruction set. Standard 803x/805x assemblers and compilers can be used to develop software. 0x80 0x7F. 8 kB Flash. SAB 80C166/83C166. Pin Definitions and Functions (cont'd). Symbol. VCC. The high performance offered by the hardware implementation of the CPU can efficiently be utilized by a programmer via the highly efficient SAB 80C166 instruction set which includes the following instruction classes SAB 80C166/83C166. Pin Definitions and Functions (cont'd). Symbol. VCC. The high performance offered by the hardware implementation of the CPU can efficiently be utilized by a programmer via the highly efficient SAB 80C166 instruction set which includes the following instruction classes 80 SFR Definition 9.5. The devices are specified for 1.8 V to 5.25 V operation over the automotive temperature range (-40 to +125 °C). The Port I/O and RST pins can interface to 5 V logic by setting the VIO pin to 5 V. The C8051F500/1/4/5 devices are available in 48-pin QFP and QFN packages, the.