Kaba ilco 1000 series manual

/L Series FAQ Changing the Code/Combination. KAA 8. Turn the knob/lever clockwise again to the stop position. At this point, the latch (A) should not retract unless you enter the new combination (see figure 4). 9. Re-secure the combination change plug assembly by screwing it in clockwise with the. L Series lock from standard to key override. Removable core cylinders not included. Dominion Lock and Best Equivalent core is available - see above. Kaba Ilco 17 L Series Accessories Heavy-Duty Primary Locks Best Equivalent Removable Core Cylinder. D (Sold international only, not available for U.S. Simplex Wrench / Change Tool. Kaba Simplex. MSRP: Now: $ Was: Simplex Combination change tool, lock installation tool for Series. Kit includes wrench, and DF59 key. MSRP.

covers existing Kaba Ilco , L and PowerLever installations. Since it features a direct-drive design, there is no need for a clutch mechanism. This decreases the possibility of internal breakage and the subsequent linkage repairs. And with a fully independent lever, there's less chance of damage from abuse. Using the Simplex The Simplex Series provides exterior access by combination, while allowing free egress. This mechanical lock, with knob option, eliminates the material and labor expense of battery replacements, has a single access-code and is programmed via the keypad without removing the lock from the door. Downloads. Kaba combination locks are installed on doorways to restrict access to personnel who know the code. To maintain security, it's important to change the combination on Kaba locks when employees leave the company or if a security breach occurs. Change the combination by disassembling the lock.

Kaba Simplex Series Knob Pushbutton Locks Kaba Simplex This series is ideal for limiting access in high-traffic areas. Two access control functions are available in addition to standard combination access control: • Key Override: Allows a facility to maintain or initiate a keyed-alike security system with the same key system already in use. Kaba Ilco /4" Backset Combination Entry Mechanical Pushbutton Knobset with Key Override from the Simplex Series. Model: Starting at $ FREE Shipping. Simplex Series FAQ Resetting the Code/Combination From a Lost Code 1. Remove the back plate from the front lock housing by removing the six back plate screws. 2. Lift the chamber linkage (A) off of the control shaft (B) by prying up with a small flat blade screwdriver (see figure 1). 3. Remove the shaft bushing (C). 4.