How to release a manual winch

 · Release the winch clutch and spool out the necessary length of winch cable. Align the winch cable as close as possible to the winching vehicle's centerline. Attach the winch cable hook to the anchor point or the stuck vehicle's frame following instructions in this manual. Re-engage the clutch on the winch. Slowly winch in the slack in the winch cable. goes through the winch mount or bumper. Gear Train The reduction gear converts the winch motor power into a large pulling www.doorway.ru gear train design makes it possible for the winch to be lighter and more compact. Braking SystemThe brake is automatically applied to the winch drum when the winch motor is stopped and there is load on the wire. Warn Industries, Inc. S.E. Capps Road Clackamas, OR USA FAX: www.doorway.ru Customer Service / Service Clients:

This type of manual winch is installed on Inland and Coastal barges and www.doorway.ru model winch is equipped with a load holding dog and a modified release lever. The hand lever will lift the dog out of the winch gear teeth using a cam-like www.doorway.ru winch is outfitted with a manual, hand operated brake. Move the toggle every few seconds, then release it to avoid damaging your winch motor by moving it too fast. Check this too: How to Wire a Winch Without a Solenoid The only inconvenience to the In-cab toggle switch is you will have to repeatedly move from the inside of your vehicle to the outside when making adjustments to the winch cord. A: A come along winch is a piece of equipment that allows you to pull heavy weights, using a ratcheting gear pulley system. Come along winches are made from metal and feature a strong, coiled cable or rope which is coiled gradually using a handle, enabling you to slowly move heavy objects.

Connect the red wire (A) to the Safety switch terminal. It supplies power to the Safety switch and also ensures the winch only draws power when needed. Then, connect the other two wires (B and C) to the opposite terminals of the toggle switch. Check to see which side is the in and out and flip accordingly. Releasing the cable before pulling. Step 1 – Disengage main ratchet drive. First, locate the drive pawl spring on the lever handle and pull it to the 'up' position to disengage the main ratchet drive. Step 2 – Attach load hook. Step 3 – Release cable. Step 4 – Release stop pawl trigger. Swing the handle all the way over to the other side until there is some resistance. Here’s the key — at this point, push a little bit harder until you hear a very audible “clunk”. That clunk is the sound of the stop-pawl being pushed off of the ratchet, thus releasing the tension just a little. The cable will release one step of the ratchet.