Why wont my downloads go to nexus mod manager

Taurus faced trouble when a long list of their guns, made from to , had trouble with firing. The company faced a class-action lawsuit that paved way for a massive recall on their products. Get the on the Taurus firearms recall here so you can take the necessary steps in case you own one!

They always come under fire for making junk semi-autos that do not perform when they should, though. This article explains what you need to know about the Taurus pistol recall.

There is a Taurus recall forum and a Taurus firearms recall website though, from which you can get the latest update on the Taurus firearms recall status.

The recall included nine of their more popular handgun models manufactured between , namely:. Once the recall period for the pistols started in the fall of , all transactions were held by a third party, rather than Taurus.

It is a pistol that fires a bullet with each trigger pull, then prepares another discharge right after. At the time, some have estimated the total cost for the company to be somewhere near the 50 million dollar mark. That is, once the recall is over and everyone, including attorneys, has been paid.

While a settlement is nice and all, not everyone got covered by this. To make matters even worse for them, why would anyone want to buy a gun from a company with a class-action lawsuit, and who needs to recall that many Taurus pistols? I know many law enforcement officials who chose Taurus firearms. Imagine what they would say if they heard about the settlement Taurus is providing for their faulty firearms.

Oh, I know why. And because companies recall products without defects all the time. Handgun models are not supposed to work like that. Taurus, I have a novel idea that goes something like this: Admit that your Taurus pistols were faulty, then apologize for it and let the gun community at large know how very sorry you are. Also, let us know that a Taurus pistol recall will never happen again. This story first broke somewhere else, first.

Here is the link to that original story on the Taurus firearms recall. Make sure you read it because they covered some details that I left out.

Safety is an important factor that consumers consider for certain firearms. Ready to write up your first gun review. View Results. How do you feel about the Taurus firearms recall? Let us know in the comments section below. Follow us on Facebook , Instagram , Twitter , and Pinterest! Disclaimer: All content on this site is for informational purposes only. Please read our full disclaimer here. Just a thought. I also own Taurus, and love my gun.

Probably comes from youthful inexperience as a writer. Tricks are all Obama knows, deceitful son of a bitch! Those mother fuckers murder babies, rip em apart and do whatever with those tiny body parts, and want to call legal gun owners domestic terrorist?

It wont bankrupt them, and not everyone of the guns recalled will make it in to be recalled. But, again, with the Gun Lobby trying their damndest to kill gun manufacturers in this country what then, our Armed Forces will carry Swedish and German weapons only??

I would like to know the complete list as I have two Taurus guns. A PT and a PT Never had a problem. Granted I have not shot that many rounds through ANY of my guns. I need not see why I should. Only about rounds in any of them and I have many. Then cleaned and lubed them and put them away. So who will send us list or will we be notified by Taurus?? I have moved many times over the years since purchasing my guns. So how would ANY of the manufactures know how to contact me??

Been buying guns for over 45 years now. I have owned Taurus firearms for many years and they have always worked fine with zero problems. Now I understand that as I am someone that respects firearms and takes good care of them if the firearm is maintained properly the chances of a malfunction drops dramatically.

I carry this firearm all the time as my concealed weapon of choice. I do so because it is accurate, fires a. Another Reason I like this weapon is because it has a second strike capability which means that should the round fail to fire the first time I can simply pull the trigger again and the firing pin will strike the primer again hopefully making the gun go bang. All I need to do to bring my weapon into action is flip off the safety with my right thumb and pull the trigger as this firearm is capable of double action.

When it goes bang it is now in single action mode and even more accurate than before. Bottom line, I think it is a damn fine firearm. I love mine, no problems yet, had a few jams at the range, but after a good cleaning, it worked well. This Firearm was made for tactical use and looks and feels great in my hands. What holster do you use? I bought at PT G2 Dec , production model. After 29 shots the trigger safety broke.

I notice others have had the same problem. Taurus has the gun for 7 weeks now and thier customer service indiicates parts on order. They also indicated looking into this issue for possible defect. I guess my gun is outside of the recall production date ending I wish I would have gone with another manufacture.

Are you aware of others with a simalar defect. Thanks, Robert. I have had Taurus pistols all my life all different kinds over the yrs. I finally settled on keeping my pt 92afs and a pt g2. Both have been flawless in operation…I have had friends who have had glocks n sigs and had sent them off several times for repair for one reason or another.

Do not return your pistol to Taurus. I made that mistake. They said that I will get a free replacement, but all replacements are on backorder. They will not say when the backorder may end. They will not issue a credit so that you can purchase a different pistol.

If you contact Taurus they just read a script to go to the Cartersettlement website and follow instructions. At that website the only instructions are to fill out an online form and leave your information. Taurus is dodging this recall by constantly pushing the Final Court Settlement date off into the future.

Taurus will not take the guns back even though the settlement declares under the Enhanced Warranty they must take them back without any claim and without any cost to the owner. The only people making out on this bogus recall are the attorneys. Even if this ever gets in gear to start taking back guns, the time limit for them deciding what to do means you may never get a gun back, because they will not return your gun.

Buy quality guns from companies like Ruger, Smith, Glock, Sig, etc…. If you want a cheap gun buy a used Ruger instead of a crappy Taurus. I Have a Taurus. This will discharge on its own and has several times. I an glad that no one was injured when this was Happening.

I have E-Mailed Taurus with no Response at all…and when called ,,they give the runaround.. Does nobody else have this problem? A quick Google search is telling me that adb backup only works on the primary user. I found a thread where someone said they tried to use my kit on the secondary users with adb backup and it just returned a 0KB file.

Looks like you would need root so you could use Titanium backup pro with multiple profiles option, or just make full nandroids. I guess multi-user is still relatively new. Hopefully Google will improve adb backup in the future. Follow the instructions. You will have to boot your device into bootloader mode and configure the fastboot driver, which you should be able to do — then you can get everything back up and working.

Thanks NRT! I messed up my phone so i decided to unroot it completely back so…it works! I tried some of the others out there but none of them can do what this tool does. I put some jingle in your pocket in appreciation to your hard work. Even what appears to be a small change can take hours and hours of blood, sweat and tears. Again, thank you! Thanks man! Most appreciated. Yes, this program has come a long way from when I started it.

Happy to hear that you are utilizing all the features! Please provide more details… What happens? I personally run Win 8. Its fully compatible. You need to explain what occurs. I have used NRT since 1. It is not a USB driver issue. I have done several Flash Stocks but the problem persists.

Flashing stock does wipe everything. Then reflash stock. I am trying to get my Nexus 7 v2 back up and running. It tells me to press any key to exit and nothing on my tablet has changed.

I have tried everything the instructions have told me to, but nothing. It seems nothing can talk to my tablet. Anyway to force my tablet to except this stuff. My N7 goes up on the Device Manager list of windows, so it is being recognized.

I can get to the bootloader screen also. Not sure what my next step is. Please help. Have you unlocked your device yet? Unlocking is a prerequisite for flashing stock. If you have unlocked, please post a screenshot of the failed flash. It says on the bootloader screen that my locked state is locked. How can I change that without my tablet turning on? I see now the unlock section of the Toolkit. I was hitting the OK button I think each time and it would not do anything.

I now have the Unlock bootloader screen on my tablet and have clicked yes. Pressed the power button and nothing. Seems to just stay highlighted on Yes and does not change from there. Or try removing the usb cable when you see that screen before pressing the Yes via the power button.

Also tried removing USB cable when I see the screen, does not change anything. Otherwise my situation is exactly the same as the original post from ronjcar. Just stay in bootloader mode, and use the toolkits unlock button. Chose the option to do it manually. I have the same issue as ronjcar. Please try again. I have never received any errors when rooting. And looking at my code, I am really unsure how that error could even be present at that point. Please confirm you are running v1.

I am a bit confused. I just experienced the exact same error. Nexus 4. Seemed to happen right at the end after the final reboot, just after it said device detected…. I did reinstall the program but still having the same problem. I run win 8. Have you tried basic windows clean-up, and maintenance trouble-shooting, like running ccleaner for registry errors. I have never even heard of gdipp until you posted that.

But here is the official page for it. Maybe you made a bad install. Sorry man, but this program is totally not related to my program. That is the most I can help. I had used ccleaner cuople of weeks back. I have a Nexus 4. I am trying not to ruin my phone. Maybe try solution 1 instead. Or proceed to the driver test. Just an FYI — if you configure your drivers incorrectly, its not going to ruin your phone..

So need to worry. Just attempt to configure your drivers, run the driver test.. Hey I have nexus 4. Hi — when attempting to backup SD card on android 4. Does this mean not on lock screen or the type of unlocked that wipes everything? Hey, I really need to add a detailed response to this in the FAQ, and my apologies for the late response. Create an androidbackup with neither shared nor system apps checked. Also backup any folders on your sdcard that appear to be auto-created by games on your device.

If you want to be super safe, you could just backup your entire sdcard and then restore stuff back selectively. Backup SMS and call logs if you care to keep that. You could also backup contacts however they more likely auto-synced with your gmail account. Sign into your primary gmail during initial setup and let google play automatically restore your apps.

Reconfigure your system settings manually like email accounts, stock home launcher layout, etc. This will give you the most complete and cleanest restore possible. The main annoyance will be re-setting up your email accounts and homescreen layout if you use the stock android home launcher ; other than that, you will have everything back and be back to where you started.

Hi Thanks for your gr8 work I am planning to buy nexus 7 lte. Unlocking may void your warranty however re-locking your device with the toolkit will make it impossible to detect that it was ever unlocked.

Hope that helps. There is a special SMS backup feature as well. Please report back. I am trying to recover data from my soft-bricked Nexus 4. Can I use the toolkit for this? If the bootloader is locked, there is very little you can do. Without the toolkit, in bootloader mode;. Hopefully this will allow you to boot up. Thanks for this, I was able to wipe the cache using your directions.

Unfortunately, though, the phone would not boot up after that. When I hold down the power button, it just goes back into the loop with the Google circles going in and out. To get your device working, try doing a factory reset from stock recovery. Okay, thanks, I lost the data but at least I have my phone back. Have no idea how it got into that state! Thanks for helping me get it back! My computer is running in win 7 64 bits.

What can I do? No still nothing. Re-installed the software and same… Reboot pc, reboot nexus 7 and still nothing. You are a genius! I was running Android L on my Nexus 5 and wanted to take it back to 4. Refreshing did nothing. I will be donating to you. You mean a Nexus One? If I got my hands on one, I would probably try and support it for nostalgia sake. First, thank you for an amazing Toolkit!

I successfully installed the drivers and proceeded through the unlock process. For all intents and purposes it appears to have been at least partially successful. Should I proceed through the Full Driver Installation process again?

Is there something that I might have missed in the steps? Could this have an effect? Yea I managed to delete ALL my drivers for all my android devices then reboot then had to go through about 40 more steps to get it to work… not as simple as many people say. Sorry you are having difficulties. I made the driver installation as simple as humanly possible. I hope you get it resolved. There was nothing wrong with the software. Yes, you can flash any available android version to your device easily with the toolkit.

This is a lifesaver. I was able to flash back to stock and OEM Lock it to prevent me from ever bricking it again. WugFresh, many thanks.

Combination of, hold volume button down then insert charger, the nexus 4 will boot to fastboot mode. I was rooting Nexus 4 running on KitKat 4. How is that possible? This update requires bootloader 4.

To make matters worse my usb debugging is NOT enabled. Can you guide me or point me to the steps that can help me recover my phone? You can unlock and flash stock purely in bootloader mode. No USB debug required. The unlock script asks if you want to start in bootloader mode. Do that. My Nexus 4 is stuck on a boot loop.

I am unsure if usb debugging is enabled or not. When I run the tool kit I get the message. I do not know what to do and am asking if you could help with instructions. Please and thank you! So my Nexus 7 is stuck on a boot loop where it only displays the Google screen — endlessly.

It will sit here like this for hours, not doing anything. Does this process normally take longer, and I am just being impatient? If I press the power button on my tablet in the midst of this it finally pulls up the following text….

Also try rebooting your computer. Those errors are indicative of a wonky USB connection. To answer your first question; No — erasing boot should like like 1 second. Let me know if you get everything resolved.

I appreciate the suggestion… but it seems to still be an issue. I have restarted my computer multiple times, and tried at least two other cables. Seems that it is still an issue though as it will just sit here for ages not changing at all. Attempting to unlock the bootloader freezes, as does anything else I seem to try… Any other thoughts??

Do you have an unlocked bootloader? Some sections says that the bootloader is locked. And when you say, it gets stuck on waiting for device.. Is it on? Or is stuck in bootloader mode? There are four available options to choose from. Hey there, Wug! Had Android L Developer review installed. Was a bit buggy and was interfering with other apps. This made reverting back to stock 4.

Well done and thank you! BTW, will you have the new 5. Greetings, Just wanted to put in a HUGE thank you, your efforts with NRT have helped me for some time now learning android and playing around with multiple devices! Please keep up the great work!!! All the best, Dave Stanton. I am having a problem with unlocking the device.

I run the toolkit and it sucessfully unlocks the device and shows up as unlocked at the bootloader screen. Any workaround to this? You really need your bootloader to unlock to do anything. Instead Lollipop they will give us another new version of Android L Preview codename lpx13d. In a few minutes. Wug, You guys are awesome. Id installed Clockwork mod recovery.

Following the LONG way around using command prompts, etc got me no where. XDA suggested that you not use an automated script. Then I found your script. Boy am I glad that I found you. Getting back to stock was simple. Just a few clicks…. Took a few tries to get the phone locked again. But its all stock now and ready for the OTA.

Thanks again! You will be seeing a donation for your hard work and simplifying the process so drastically! Anyways, I downloaded the stock factory image from Google and attempted to flash it through the toolkit..

I flashed Android5. Wait for SuperSU update to try again. Thank you for a reply. Eagerly waiting for the update. Change the build type to the latest official build. Same thing happened to me. By the way, as always, love you WugFresh! Are you out on the Nexus 5? I figured it out,for CM11 users at least. Appreciate the software WugFresh! Appreciate the software WugFresh!! Getting Flash Write Failures on my Nexus 7.

For what file specifically? The new 5. Does the download happen really quickly? I have used NRT to successfully unlock and root my Nexus 7 Now I want to lock the bootloader while keeping root. Can it be done with NRT? Yes, relocking the bootlader will work without flashing stock first.

That said, if you have problems in the future, it will make it more of a hassle to deal with. If you understand these limitations of relocking the bootloader, and still want to I am guessing for security reasons? Yes, for security reasons, and I understand the consequences. Thanks for the quick response. Awesome app! Unlocking causes a WIPE. So if you are not unlocked yet, then you must backup stuff first. If you are running KitKat and trying to flash Lollipop — the procedure will wipe data unless you disable that in the settings menu..

I have installed factory image of Android 5. Now i must come back to stock 4. I unistalled old drivers, instaled new drivers, used Google drivers and also Universal Drivers or Pdna Drivers.. If your computer can see your device when its in bootloader, then you should have no problems flashing stock and returning to 4.

Updated to v1. Let me know if there is a preferred way to notify you. Or if you just use changedetection, or something. Sure, mgnews majorgeeks. Yes i did. Tried the original cable that comes with it still no luck.

Am i doing something wrong? Stuck on Google screen. OKAY [ 0. Hi im very much new to doing this type of thing and I kind need some help walking me through the process of unrooting my nexus 5. I had a friend root it and I have no use for it and I would like to get rid of it. Help please. Check out one of the many videos on youtube. The toolkit walks you through everything. I looked at Babbling Booleans video and I followed it all the way through and when I tried to flash the stock ROM it said that I did not have the proper driver packages.

And I installed them and it still did not work. Hey Wug, small problem. My original N7 soft bricked. Seems to work until near the end it hits this:. I tried manually starting the device with normal power on, restart bootloader and recovery mode but nothing goes anywhere.

Its fine that your device is messed up.. Thanks for the quick reply! The USB is still connected, but sitting for 30 mins — nothing happens. And then nothing happens. Simple power on does nothing. Rinse and repeat. No change. No chairs show up in the casting room, so I can't control who's lead and who's not.

When I put both actors and directors in their respective rooms, they don't show up-just continue walking around--but it still apparently counts as the script is rehearsed. The extras show up automatically, but the movie says it needs no crew at all and none show up. This leads to, when the movie is done, the crew reviews being terrible--because there was no crew at all. Not to mention, when shooting the film, only the actor will act out their parts. The director is needed but just walks off once shooting starts, and the crew is nonexistent.

No one's actually filming anything, but the movie still gets shot anyway. It's damn baffling. Does anyone else have this problem? I love this game and own it as well. Was very interested in the mods. Unfortunately I still find that it's unplayable as of now. This is just too bad, it's such great game. I have tried every fix I can think of, nothing works. I have tried all the suggestions, still nothing.

I've given up for now, I'll check back, but I don't expect anything, I've been checking back and trying things since Gee 1 point. Hey all, I recently downloaded the game and all the files, my directors and actors keep coming up as black silhouettes : is there any way to fix this? MrP 1 point. Hey, thanks for the helpful comments! I tried following Sweetolebob's comment from , but when I get to double-clicking on the setup. Verify that the specified transform paths are valid. I had a problem with crashing, even after using Windows 7 compatibility mode.

I wondered if it had to do with the resolution, and applied this registry fix that I got from gamefaqs. To run The Movies in a custom resolution open the Registry Editor by clicking the Start button Run and typing regedit in the run box.

After pressing OK the editor will load. A list of information will display on the right hand side of the editor after clicking on The Movies folder. Next, right click on GD: Screen Width and click modify. Enter the width you want for example and click OK. Then right click on GD: Screen Height on click modify.

Enter the height you want for example and click OK. Next time you run the game it will start in your custom resolution.

Note: The game must be ran before the information appears in the registry editor. I I will mention that while I was in the registry, I set the "Skip Front End" to 1 and it now skips the splash screens and takes me directly to a sandbox mode. I just use "Load Game" at this point. My problems may not have been resolution related - it may have been GD: Level Game Detail which is actually set to 0 now. I'm just happy it runs without crashing now, and I don't have the black "Void" appearance of the actors now either.

Hari 0 point. They look like void people. Does anyone know how to fix this? Livia V 0 point. Enfim, podem baixar que deu certo! Does this work on windows 10?? I can't download it even though I am following the order correctly.

Teodor 0 point. Lol This works. Good luck! LadyofMusic 0 point. Hi, I followed what Sweetolebob18 advised to, and it worked fine unfortunately I had to factory reset my laptop. I've tried it again, and it just crashes a few moments into loading a new game- sandbox or story- any advice? Why won't the game download? Any suggestions? JMessy 2 points. I followed Sweetolebob18's instructions and the game worked great for 2 days.

Suddenly it started crashing constantly, disappearing save files, after one crash the icon for it even vanished off my desktop. It doesn't matter whether it's a save file IE, it's not an error being triggered by a certain event or a new game. It just shuts down within minutes, occasionally the whole screen flashes red insanely. Anyone have any suggestions? I was so excited to play again.

Eytan 0 point. I have a big problem the game is ok working fine but when I try to save game it. Maximumlink 0 point. Nvm, I can get to the title screen now, but I can only play the tutorial, in the normal or sandbox modes it crashes on loading, and in the tutorial, all the people are black. Maximumlink 1 point. Okay, well my game finally launched after running in admin, but the only mode that works is the Tutorial, and all the characters are black, help?

Okay, my game completely downloaded with no issues whatsoever, but when i launch the game, i can only get past the Lionhead Studios intro, then the screen goes black and if i press any buttons a weird square of flashing colors pops up in the corner? Any help? Tweetytc1 -5 points. Hey guys! Im not heaps computer savvy these days but used to love this game. I tried to download it twice and it took hours both times but it ended up saying "failed - no file" NoNameGuy -2 points.

Parry Hotter 51 points. Install it I know, unbelievable 2. On the game's launcher: Right-click Properties Compatibility 3. Check "Run this program in compatibility mode for:" and select "Windows 7" 4.

Check "Disable full-screen optimisations" 5. Click "Ok" and run the game It took me two weeks, three heart attacks and a divorce to find out the solution. I've tried everything from Windows XP virtual machine to an Ouija board, so the fact that it turned out to be so simple makes me want to cry. Don't make my mistakes. Dragon Sommerfeld 0 point. I actully bought this game when it first came out but i guess im missing the main install cd.

If i download the version on this website will my expansion cd that i own work with it. You can also drag and drop the file directly to Vortex. Which is a bit faster than browsing through all. They were working perfectly fine when managed by NMM, but now using Vortex, they are all fucked.

Disabling the Mods in Nexus Mod Manager. Mods not working from Vortex So I only have four mods for blade and sorcery and it says that they are installed and enabled but in game they are no where to be seen.

I also checked in OpenIV if the file was really changed. The mods should then be working. The mod you were looking for couldn't be found. I've read and re-read Nexus forums and the mods instructions and I've reinstalled the mods at no avail both manually and with NMM.

This is the preferred and recommended way of installing Vortex. I did read where Tannin stated that was on the ToDo list. Our devs have been working through many of your feature suggestions and implemented some very handy new improvements that will make your modding lives a bit easier. Vortex allows you to easily install and uninstall your mods, create profiles for different mod combinations and quickly check for updates.

Under this screen is a Confirm button. Vortex can display several different icons for updates. Simply download it with Vortex and click the button for install it. Go To Extensions. To download any of these mods click either the "Vortex" button in the top right of the mod page or the "Mod Manager Download" button on the files tab.

Vortex is certainly nevertheless in Beta, or probably Alpha. The roof textures are the same, everything is the same whether I enable the texture mod or not. For mod authors who want to make their mods compatible with U6, you If you determine that Vortex is the cause of your game crash or mod not working you have to report the immediate thing vortex did wrong in detail - e. I installed them via Vortex, i tried manual installation, i read forum posts about startupoptions in steam, i tried youtube videos… nothing helped.

The mods are for the right version for the game and I uninstalled them and reinstalled them but they are still not working. The latest update for Vortex, uninstalled all my mods. Install your mods. And make sure "Cyberpunk Support" or "Game: Cyberpunk " are enabled. None of them are working. Most answers to your problems can be found down below The official download page for Vortex, the new mod manager made by Nexus Mods.

It does not open. After download is done click install 4. Install your mods only 4 or 5 at a time, then see if you can load the game. This guide will walk newcomers to modding through the steps necessary to find, download, and install our mod manager Vortex as well as the following mods for Skyrim Special Edition:You just need to take the file archive ie"7zip" drag it to the bottom of vortex under the mods tab, and drop it where it says drop files.

I've even Mods not working from Vortex So I only have four mods for blade and sorcery and it says that they are installed and enabled but in game they are no where to be seen. I've downloaded a couple, but for the sake of simplicity we'll focus on the Sprint mod that makes you run faster. That enables the Mod Manager Download buttons on Nexus mod pages. Ut referred to one of the mods I have on Vortex. Does anybody know what could cause this? Imo you should start over with a clean GTA and do them 1 by 1.

It tells you in Vortex that you have to also enable the mods in the launcher.