Chef download file from nexus using remote_file

The default mode for new files and directories corresponds umask of salt process. For existing files and directories it's not enforced. The copy function accepts paths that are local to the Salt minion. The encoded file. A Pillar path to the encoded file. Uses the same path syntax as pillar. The hashutil. The hashing algorithm to use to generate checksums. Wraps the hashutil. The group ownership set for the directory; this defaults to the group salt is running as on the minion.

On Windows, this is ignored. Accepts a list of strings representing what you would like to recurse. Limit the recursion depth. The permissions mode to set any files created if 'mode' is run in 'recurse'. If the directory is located in a path without a parent directory, then the state will fail.

Make sure that only files that are set up by salt and required by this function are kept. If this option is set then everything in this directory will be deleted unless it is required.

When 'clean' is set to True, exclude this pattern from removal list and preserve in the destination. Symlinks permissions are always 0o on Linux. If the name of the directory exists and is not a directory and force is set to False, the state will fail. If force is set to True, the file in the way of the directory will be deleted to make room for the directory, unless backupname is set, then it will be renamed.

If the name of the directory exists and is not a directory, it will be renamed to the backupname. If the backupname already exists and force is False, the state will fail.

Otherwise, the backupname will be removed first. The owner of the directory. If this is not passed, user will be used. If user is not passed, the account under which Salt is running will be used. A dictionary containing permissions to grant and their propagation.

A dictionary containing permissions to deny and their propagation. Verify that the named file or directory is present or exists. Ensures pre-requisites outside of Salt's purview e. Create a hard link If the file already exists and is a hard link pointing to any location other than the specified target, the hard link will be replaced. If the hard link is a regular file or directory then the state will return False.

If the regular file is desired to be replaced with a hard link pass force: True. If the name of the hard link exists and force is set to False, the state will fail. If force is set to True, the file or directory in the way of the hard link file will be deleted to make room for the hard link, unless backupname is set, when it will be renamed. If the location of the hard link does not already have a parent directory then the state will fail, setting makedirs to True will allow Salt to create the parent directory.

The user to own any directories made if makedirs is set to true. This defaults to the user salt is running as on the minion. The group ownership set on any directories made if makedirs is set to true. This defaults to the group salt is running as on the minion. If directories are to be created, passing this option specifies the permissions for those directories. This function differs from file.

Should the value be the same as the one already in the file, no changes will be made. It is an error to supply both. Key to search for when ensuring a value. Use in combination with a value parameter. Value to set for a given key. Use in combination with a key parameter.

Number of occurrences to allow and correct , default is 1. Set to -1 to replace all, or set to 0 to remove all lines with this key regardsless of its value. Any additional occurrences after count are removed. A count of -1 will only replace all occurrences that are currently uncommented already.

Lines commented out will be left alone. Disregard and remove supplied leading characters when finding keys. When set to None, lines that are commented out are left for what they are. The argument to uncomment is not a prefix string. Rather; it is a set of characters, each of which are stripped. Values are checked case insensitively, trying to set e.

An example of using file. The same example, except for only ensuring PermitRootLogin is set correctly. Notice how the key is not matched case-sensitively, this way it will correctly identify both 'PermitRootLogin' as well as 'permitrootlogin'.

It has a lot of quirks. You may find file. It can remove, add, and replace lines. If neither before nor after are provided, and match is also None , match falls back to the content value. If line does not exist, it will be added. If before and after are specified either zero lines, or lines that contain the content line are allowed to be in between before and after.

If there are lines, and none of them match then it will produce an error. Nearly identical to ensure.

If a line does not exist, it will be added. The differences are that multiple and non-matching lines are alloweed between before and after , if they are specified. The line will always be inserted right before before. If location is used, it takes precedence over the other two options. If location is provided, before and after are ignored.

Valid locations:. Regular expression or an exact case-sensitive fragment of the string. Will be tried as both a regex and a part of the line. Must match exactly one line in the file. This value is only used in ensure and insert modes. The content will be inserted directly after this line, unless before is also provided. Output a unified diff of the old file and the new file.

If False return a boolean if any changes were made. Default is True. Using this option will store two copies of the file in-memory the original version and the edited version in order to generate the diff. Do not raise any exceptions. Keep indentation with the previous line. This option is not considered when the delete mode is specified.

The group ownership set for the file, this defaults to the group salt is running as on the minion On Windows, this is ignored. That processing can be bypassed in order to pass an equal sign through to the remote shell command by manually specifying the kwarg:. If the mode is ensure instead, it will fail each time. To succeed, we need to remove the incorrect line between before and after:. With an ensure mode, this will insert thrice the first time and make no changes for subsequent calls.

For something simple this is fine, but if you have instead blocks like this:. This will fail because there are multiple End lines. Ensure only allows either zero, or the matching line present to be present in between before and after. Manage a given file, this function allows for a file to be downloaded from the salt master and potentially run through a templating system. If source is left blank or None, please also set replaced to False to make your intention explicit.

The file can contain several checksums for several files. Each line must contain both the file name and the hash. If no file name is matched, the first hash encountered will be used, otherwise the most secure hash with the correct source file name will be used. If the remote server URL has the hash file as an apparent sub-directory of the source file, the module will discover that it has already cached a directory where a file should be cached.

By default, Salt will look for the filename being managed. In cases like this, Salt may match the incorrect hash. This argument can be used to tell Salt which filename to match, to ensure that the correct hash is identified.

This argument must contain the full filename entry from the checksum file, as this argument is meant to disambiguate matches for multiple files that have the same basename.

So, in the example above, simply using foo. Set to False to discard the cached copy of the source file once the state completes. This can be useful for larger files to keep them from taking up space in minion cache. However, keep in mind that discarding the source file will result in the state needing to re-download the source file if the state is run again.

The group ownership set for the file, this defaults to the group salt is running as on the minion. The permissions to set on this file, e. The default mode for new files and directories corresponds to the umask of the salt process. The mode of existing files and directories will only be changed if mode is specified. Because the source option cannot be used with any of the contents options, setting the mode to keep is also incompatible with the contents options. As a consequence of how the files are transferred to the minion, and the inability to connect back to the master with salt-ssh, salt is unable to stat the file as it exists on the fileserver and thus cannot mirror the mode on the salt-ssh minion.

The attributes to have on this file, e. If this setting is applied, the named templating engine will be used to render the downloaded file.

If set to True , then the parent directories will be created to facilitate the creation of the named file. If False , and the parent directory of the destination file doesn't exist, the state will fail. If this is not set, directories will be assigned permissions by adding the execute bit to the mode of the files.

If set to False and the file already exists, the file will not be modified even if changes would otherwise be made. Permissions and ownership will still be enforced, however. Overrides the default backup mode for this specific file. If set to False , then the file will only be managed if the file already exists on the system.

Specify the contents of the file. Cannot be used in combination with source. Ignores hashes and does not use a templating engine. This value can be either a single string, a multiline YAML string or a list of strings. If a list of strings, then the strings will be joined together with newlines in the resulting file. For example, the below two example states would result in identical file contents:. Operates like contents , but draws from a value stored in pillar, using the pillar path syntax used in pillar.

An example of this pillar setup would be like so:. The private key above is shortened to keep the example brief, but shows how to do multiline string in YAML. The key is followed by a pipe character, and the multiline string is indented two more spaces. However, this will not work for binary files in Salt releases before Operates like contents , but draws from a value stored in grains, using the grains path syntax used in grains.

The motd grain is not a default grain, and would need to be set prior to running the state:. Setting this option to False will ensure the final line, or entry, does not contain a new line. If the last line, or entry in the file does contain a new line already, this option will not remove it. This delimiter will be passed through to pillar. If specified, then the specified encoding will be used. Otherwise, the file will be encoded using the system locale usually UTF Error encoding scheme.

If the desired path is a symlink follow it and make changes to the file to which the symlink points. The specified command will be run with an appended argument of a temporary file containing the new managed contents.

If the command exits with a zero status the new managed contents will be written to the managed destination. If the command exits with a nonzero exit code, the state will fail and no changes will be made to the file.

Useful for checkers dependent on config file location e. Useful for checkers dependent on config file extension e. Verify that the named file or directory is missing, this returns True only if the named file is missing but does not remove the file if it is present.

Create a special file similar to the 'nix mknod command. The supported device types are p fifo pipe , c character device , and b block device. Provide the major and minor numbers when specifying a character device or block device. A fifo pipe does not require this information.

The command will create the necessary dirs if needed. This is logically in place as a safety measure because you can really shoot yourself in the foot here and it is the behavior of 'nix mknod. It is also important to note that not just anyone can create special devices. Usually this is only done as root.

If the state is executed as none other than root on a minion, you may receive a permission error. This state exists to support special handling of the beacon state argument for supported state functions. It should not be called directly. Ensures that a file is not present in the minion's cache, deleting it if found. This state is primarily invoked by other states to ensure that a fresh copy is fetched.

The URL of the file to be removed from cache. To remove a file from cache in an environment other than base , either use the saltenv argument or include the saltenv in the URL e.

If a local file is passed here, the state will take no action. Additionally, this state now supports patch files that modify more than one file. To use these sort of patches, specify a directory and, if necessary, the strip option instead of a file.

A suitable patch executable must be available on the minion. Also, keep in mind that the pre-check this state does to determine whether or not changes need to be made will create a temp file and send all patch output to that file.

This means that, in the event that the patch would not have applied cleanly, the comment included in the state results will reference a temp file that will no longer exist once the state finishes running.

Templating is also now supported. Works the same way as in file. For best results, short opts should be separate from one another. The -N and -r , and -o options are used internally by this state and cannot be used here.

If specified, any rejected hunks will be written to this file. If not specified, then they will be written to a temp file which will be deleted when the state finishes running. Number of directories to strip from paths in the patch file. For example, using the below SLS would instruct Salt to use -p1 when applying the patch:. New in version Specify the environment from which to retrieve the patch file indicated by the source parameter. If not provided, this defaults to the environment from which the state is being executed.

The text will not be prepended again if it already exists in the file. You may specify a single line of text or a list of lines to append. Optionally, require the text to appear exactly as specified order and position.

Combine with multi-line or multiple lines of input. Recurse through a subdirectory on the master and copy said subdirectory over to the specified path.

The group ownership set for the directory. Overrides the default backup mode for all replaced files. When copying, include only this pattern, or list of patterns, from the source. Default is glob match; if prefixed with 'E ', then regexp match. Changed in version List patterns are now supported.

Exclude this pattern, or list of patterns, from the source when copying. When copying, only copy paths which are of depth maxdepth from the source path. Keep symlinks when copying from the source. This option will cause the copy operation to terminate at the symlink. If desire behavior similar to rsync, then set this to True. Force symlink creation. This option will force the symlink creation. If a file or directory is obstructing symlink creation it will be recursively removed so that symlink creation can proceed.

This option is usually not needed except in special circumstances. The owner of the symlink and directories if makedirs is True. If the source file exists on the system, rename it to the named file. The named file will not be overwritten if it already exists unless the force option is set to True. Filesystem path to the file to be edited.

If a symlink is specified, it will be resolved to its target. A regular expression, to be matched using Python's re. Maximum number of pattern occurrences to be replaced.

Defaults to 0. If count is a positive integer n, no more than n occurrences will be replaced, otherwise all occurrences will be replaced. A list of flags defined in the re module documentation from the Python standard library. Each list item should be a string that will correlate to the human-friendly flag name. Optionally, flags may be an int, with a value corresponding to the XOR of all the desired flags. The default for file. How much of the file to buffer into memory at once. The default value 1 processes one line at a time.

The special value file may be specified which will read the entire file into memory before processing. If set to True , and pattern is not found, then the content will be appended to the file.

If set to True and pattern is not found, then the content will be prepended to the file. If None default , uses repl. Here are some examples of curl commands to obtain the public key.

Our community of experts have been thoroughly vetted for their expertise and industry experience. The curl command allows you to download as well as upload data through the command line in Linux.

It is by default available in all Linux-based systems. Here's a sample of how to do that. Upload via Web UI. JFrog CLI is a compact and smart client that provides a simple interface to automate access to Artifactory. Create your API call as desired using the information in this article. That will most likely cause the upload operation to fail.

It is the most widely used command line utility to create compressed archive files packages, source code, databases and so much more that can be transferred easily from machine to another or over a network. Curl is useful for many works with system administration, web development for calling web services, etc.

Our sample file will be the readme for blcli, BitLaunch's command-line interface, which is hosted on GitHub. You should now see the following two credentials: 3. My answers are about Artifactory, of course. It supports Artifactory version 3. Specify a different content type of upload crl. Refer Here for the changes in Jenkinsfile. We originally started trying to use curl because it was how the clearinghouse company suggested we do so.

Use cURL. For example:. Correct curl command for uploading local file to url. Curl command examples. Then you're off to the races! At this point it is all of your standard commands, i. If there is no file part in the specified URL, curl will append the local file name.

Upload via Command Line. In the above command, make sure to replace with the actual path of the file you want to upload. Artifactory offers fully-featured operation with Helm through support for local, remote and virtual Helm chart repositories. Generate a token in sonarqube for jenkins to connect to sonarqube.

A full list of these commands are here; resources section is used to define resources that are used by the assembly line. Or, you can specify the domain via the "domain" query arg. Artifactory plugins. I tried to upload a directory to artifactory using curl command but i am unable to do? Is there anyway to upload entire directory to artifactory? It can be used together with gzip tar.

The given uri is the only information we need from this JSON response. Create the Groovy script that will become the user plugins.

The intent of the tool is to transfer data, without user interaction, to or from a server, using one of the many supported protocols. When downloading symlinks stored in Artifactory, the CLI can verify that the file to which the symlink points actually exists and that it has the correct SHA1 checksum.

I know you specifically asked about uploading with curl, and you already got an answer for it, but if it is relevant for you, when uploading withJFrog CLI, it automatically calculates and appends the checksums to the upload request. The steps to create an Artifactory API key is here.

For testing and debugging purposes it can sometimes be helpful to manually upload reports via the Web UI. Also, scriptable! Don't put a space before or after the colon. That's it, if you find this article useful do send some claps. Solution: We have a list of Curl commands to perform this action. That job then scans the available repositories using a read-only davfs2 mount, creates new index files, and In order to upload files, you first need to upload the files to Artifactory using the upload command.

You can subscribe to this list here. The purpose of this guide is to provide you as a Premium Enterprise user with the information required to determine which of the JFrog solutions best meets your needs together with a migration process from JFrog Bintray to the Curl command to download file from Artifactory.

If you found a bug or have suggestions, please open an issue. For example: deploy: Uploading all of files in my local directory with curl, Use curl with find to recursively upload all files from a specific directory: find mydir -type f -exec curl -u xxx:psw --ftp-create-dirs -T The curl command allows you to download as well as upload data using CLI the command line in Linux.

Easily generate curl command lines to test your new shining API or whatever! External analysis results include test coverage reports, test execution results, custom findings, custom metrics and more.

It is installed by default on macOS and most Linux distributions. In this note i am showing how to download an artifact simple file. The process outline is as follows: Create administrative user in Artifactory. JFrog's Artifactory is a binary repository manager. But it results in the same behaviour. This app converts curl commands to C code.

There is a space character after the cd command. Artifact upload to nexus using curl. Now install Sonarqube scanner plugin for jenkins. Luckily there exists a way to still be able to upload your files to Nextcloud using the command line and Curl. The file and then sends an email list of extracting a github package registry vs artifactory and teacher data. Able to upload the required content using curl Artifactory CLI provides a command line interface for uploading and downloading artifacts to and from Artifactory.