Firecom model 210 manual pdf download

If the squelch is adjusted too low, the microphone will be activated by almost any sound; if it is adjusted too high, it will only pick up very loud or forceful sound. Improper squelch adjustment can be frustrating, as the system will not function as intended.

This allows for much better radio and in-cab communications. This can depend on headset style and programming. Firecom Wired Headsets are pre-programmed so that some of the headsets require PTT at all times, and some allow hands free VOX activated intercom communication. A status LED on the left ear dome will flash from 1 to 4 times when the headset is powered on.

Four flashes indicate a full charge. Use the installed charging cable at your seating position or use the provided 12VDC regulated wall adapter. The most common intercom-only headset requires the user to push a button to talk. We do offer one wired headset with a toggle on-off switch that opens the microphone for continuous intercom communications. Neither headset will transmit on the radio. Firecom Wired headsets are pre-programmed so that some of the headsets require PTT at all times, and some allow hands free VOX activated intercom communication.

The yellow LED pairing light on the base station will stop flashing and remain yellow. On the Firecom Connect, power it On by pressing and holding the Power button 2 seconds, then release.

The Power LED will come on. The Mic LED will turn off. Corded headsets using a 4 conductor 3. Bluetooth Devices supporting Hands-free Profile. See our recommended devices to use with Firecom Connect here. This allows users to interact the way they want. Firecom Connect can be paired onto previous generation Wireless Base Stations. The Firecom D system has touch pad style volume controls mounted on the face of the intercom, along with LED volume indicators.

In addition to the system volume, each headset is equipped with individual volume controls. Yes, Firecom Intercoms are equipped with an auxiliary input on the D Series for cell phones, as well as an auxiliary output that can be connected to a digital recording device. Some styles of the Wireless Series Headsets have Bluetooth capability for private listening. Firecom systems can connect up to wired and up to Wireless headsets per Wireless Base Station. DECT7 Technology enables you to talk to crew members without pushing buttons or waiting your turn.

Everyone hears each other whenever someone speaks. You can talk when you want to, interrupt when you need to, and warn when you have to. Firecom Series Wireless Headsets enable natural conversation; no yelling required.

We combined our industry-leading audio quality with our exclusive auto-leveling, noise cancelling microphone so that you can understand the subtle differences in what you hear. As such, you can pick up the ComHub and carry it around the scene with you. You can also use the ComHub to connect a two-way radio. Up to 1, feet with an unbroken line of sight to the ComHub. Make sure you position the ComHub upright there are stickers on the case to help you orient it.

Raise it up off the ground optimal height is between feet off the ground , and try to have as few obstacles between the ComHub and the headsets as possible clear line of sight.

Some applications may require a different ComHub height, feel free to contact our sales or service team for a recommendation. Connect up to 20 crew members on a portable system. Installed systems in a vehicle or building can connect even larger crews. Contact your Firecom representative for more information on large systems. Wireless headsets, a ComHub to connect them, and a case to store and protect your equipment.

For more details give us a call at or email us at sales firecom. You can select from up to five channels available on the base station and switch between them with a button on the headset. The factory default is a single channel. Review the full instructions in the ComHub User Manual. For details on vehicle charging, refer to the ComHub User Manual. You can also purchase a cigarette adapter charger to charge your headset.

For details on vehicle charging, refer to the User Manual. Both the wireless headsets and the ComHub use custom Lithium-Ion batteries that charge inside each device using the provided 12VDC wall adapters or by using the charging cables inside a Firecom Charging Case.

The remote head is a duplicate of the intercom faceplate that can be located anywhere inside the vehicle. All controls, such as volume and radio selector, on the intercom box are duplicated on the remote head.

The remote head is typically mounted flush on the radio console or in the OEM overhead console, reducing dashboard clutter. An optional adjustable mounting bracket is available for mounting the remote head on top of the dashboard or on the ceiling. Outside the apparatus it is often positioned on or near the pump panel. The remote head is connected to the main intercom box with a six-conductor phone cable. This is the same type of cable used to connect the wired headset modules and wireless bases to the intercom box.

The D Series Digital Intercoms come with 1 jack for a single remote head. By adding a splitter you can have provisions for two or more remote heads. All Firecom Intercoms have the same 9-pin connector see manuals for pin out. On all MR cables, short the male pins on DB-9 to see if the radio will key. If the headset will not turn on after performing Steps 1—3, contact Service. View our video on pairing a Firecom Headset. If there is a problem with the intercom and not an installation issue , we recommend returning the equipment to Firecom for repair.

Our customer service staff will assist you with repair or replacement of your intercom and components. Visit Service for more information. Firecom intercoms and headsets come with a 2 year warranty, which is unmatched in the intercom industry. Firecom will honor the warranty on our products regardless of who performed the installation. Watch the installation overview video. This is up to you, as it depends on your skill level and comfort.

Our systems can be installed easily with simple hand tools and the Firecom crimp tool. Most installations utilize a pre-made interface cable; however some radios, typically older models, must be hard-wired to the intercom, which will likely require the services of a radio technician. To ensure peak performance, final audio level adjustments will also require the skills of a trained radio technician.

Yes, we work with all the major apparatus builders. In fact, most builders prefer our products to other intercom systems because of the ease of installation and serviceability. Either through the 8-conductor cable, or through the separate power cable included with the base. Note: Do not power the wireless base with both at the same time.

Activate your warranty instantly by filling out our warranty registration form. There are several important reasons to register your product s :. Firecom uses your registration information only to provide you with technical support and updates. We never rent, sell, or lease customer information to third parties. The warranty registration form is an interactive PDF, which you can fill out and submit online.

If you prefer, you may print the form, fill it out, and fax it to Click here to get started. Two-year standard limited warranty Download PDF. View the Radio Interface Guide. Support Mon-Fri am to pm Pacific Time. Call Mon-Fri a. Pacific Time. Quick answers to common questions. Online return merchandise request. Fill out the warranty PDF and submit. Watch the basic support videos. Firecom Connect Quick Start Guide.

How many headsets will I need? Yes, Firecom systems can be configured to allow multiple radios to transmit at the same time. What is a noise reduction rating? How does the wireless system work in an apparatus? Watch this video or follow the instructions below. To create a new Bluetooth pairing: Turn off the headset, and then turn it back on. The headset will enter Bluetooth pairing mode for 10 minutes after power on.

Here are a few key steps to remember when putting on your headset: Inspect the ear seals the pads that rest against your head for damage before use. While wearing, make sure that the ear seals rest against your skull without sitting on any part of your ear. Adjust the headband or soft strap for a comfortable, gentle fit across the crown of your head. It is normal to feel a bit of pressure when you wear the headset properly. The seal protects you from dangerous noise levels.

You will receive up to 24 hours of talk time after charging the headset for up to 4 hours. What is the difference between the styles of Series Wired Headsets? Wired headset feature comparison. Power on the Base Station and connect the DC power adapter.

Wait until the green power light is illuminated. Hold down the pairing button on the base station for the position you want to pair. The yellow LED will start flashing slowly.

On the Firecom Connect, power it ON by pressing and holding the Power button 2 seconds, then release. Turn ON your Bluetooth headset, ear buds, or speaker. You will hear an audible voice prompt stating the volume level. With Firecom Connect powered ON, press the — button for 2 seconds and release. Apply a 1 second short Power Button press. The LED indicators will turn off. Hold down the Power button for 15 seconds, then release.

This will restart Firecom Connect. Hands-free Profile Format Required. Firecom Connect is watertight and dust proof and IP67 rated. How do I adjust the volume on the system?

What would we use a Portable System for? Instructors talk hands-free; students use push-to-talk. You can expect up to 24 hours of battery life from the ComHub when fully charged. Turn on the ComHub. Press the power button on the ComHub control panel.

The green LED light will begin to flash to the right of the power button. Turn on the headset. Press and briefly hold the power button. The status LED on the left ear dome will begin flashing red. Repeat Steps 2 through 4 for each additional headset. Have your crew put on their headsets. Speak into your microphone: You should be able to hear your own voice clearly in your ear dome speakers. Your crew members should be able to hear you clearly when you speak. Adjust your volume if necessary.

What is the D Series Remote Head? Radio will not key. If the radio will not key, check the programming. If the radio keys by shorting pins on the DB-9, the problem is between the headsets and the intercom. If the relay is closing, the value will be less than 5 ohms. Check all RJ connector ports on the back of the intercoms. See if the pins are up or have been bent down all the way. If the pins are bent down, replace the RJ connector on the cable that was plugged into that port and use a pick to pull up the pins.

If the pins will not pull up, the intercom will need servicing. Wireless Headsets. My headset will not turn on. What do I do? Press and briefly hold the power button on the right ear dome. The status LED on the left ear dome should begin flashing. If the Status LED does not flash, connect the headset to the power adapter and allow it to charge.

Allow the headset battery to charge for a minimum of 4 hours to allow for up to 24 hours of operational use. Is the ComHub or base station powered on? It should be flashing green. The and are the simplest way to add effective communication to a one- or two-person apparatus. At the pump panel or while en route, the operator is able to clearly monitor the radio and transmit information without the interference of engine noise, horn blasts, or sirens.

Connected to Firecom headsets, it provides vital hearing protection. The intercom system enhances communication and protects your crew from hearing loss. Modular Jack s — connects the intercom unit to the headset modules using CA cables.