Barbie nail printer how much is it

Find image file on computer and click OPEN. File name will appear in Import text box. Image will appear in the nail window below. Use the scroll bars at the top and left side to find the area of the image desired. Slide the bar up and down on the zoom tool at the right to zoom in and zoom out until desired design has been achieved in the nail window.

Click Save. Imported design will appear in this category. Ink staining may occur on the fingernail if white polish is not applied. NOTE: your own colored polish may also be used instead of white polish. Allow to dry completely.

Allow 5 minutes for top coat to dry. The nail design washes off easily with soap and water if it is still wet, but if it has dried use nail polish remover not included. Refills available while supplies last. Settings Camera settings Camera brightness: Drag the slider to adjust the image brightness. Camera contrast: Drag the slider to adjust the image contrast. Camera alignment: Follow instructions on computer screen.

Printer settings Ink levels: Click to display the amount of ink left in the ink cartridge. Clean cartridge: Click to run the ink cartridge through a cleaning cycle. Use this if the colors of your nail designs are printing faintly, or if one color is not printing at all.

Printer alignment: Follow instructions on computer screen. Audio Adjust volume: Drag the slider to adjust the volume. Check for updates To get automatic software updates, check the box in the application.

The software will check for updates the next time it is launched. Internet connection is required for updates. See System Requirements on page 5 for specs. Use a dab of nail polish remover not included on a clean rag to carefully clean off the ink. NOTE: Dispose of the used ink cartridge responsibly.

Ink cartridges can be recycled through many retailers. Check the web sites of office supply retailers to find out if they accept used ink cartridges. Recycling helps to conserve natural resources and prevents more useable items from filling landfills. If a ink cartridge carrier stall happens, open the top cover and check the carrier for any obstruction.

Then hold the power button down for 3 seconds to turn off the printer. Press the power button again to restart. To turn the printer on — plug in the power adapter, or press the power button. To turn the printer off — hold down the power button for 3 seconds if already plugged in. Apply only a thin layer of pre-print polish.

Pre-print coat gets ripples in it if I blow on it. For best results, let the polish air dry. If streaks still appear, remove the ink cartridge from the printer see page. Using a cotton swab not included , carefully clean the ink jets on the underside of the cartridge. Reinstall the ink cartridge. The design is printing on my skin, outside of the nail. Use the sizing tool to scale the image to your nail. When printing, make sure to align your nail directly under the design in the design window.

Use less pre-print coat. Maximum image length is 0. Be creative! Center the design in the middle of your nail. Leave tip white for a French-style manicure.

Try printing two images, layering them for a cool effect! Out of focus image in design window. Open top cover of printer. Camera lens is under camera cover; lens is black. Rotate lens to adjust focus. You will see focus adjustment in design window. The design is scratched by the brush when I apply the top coat. The designs are hard to remove from my nails. The printer ink has stained my skin or nails.

Apply more top coat to the brush. To correct this issue:. You can also upload your own photo, print it and wear it, too. The possibilities for creativity are endless! Digital printer set includes nail polish, nail designs, printer, power adapter, ink cartridge, CD-ROM with software, quick start guide, and instructions. Frequently Asked Questions. The ink cartridge carrier will move to the right Press down on the black lever to open the carrier Insert the ink cartridge, contact end first Close the cartridge carrier lid until it snaps into place Close the printer lid.

Install the software Plug the printer into the power outlet and then the computer If your computer doesn't recognize the printer, unplug the USB cable, wait a few seconds and reconnect If problems persist, please consult the troubleshooting section of the instruction manual. Download the video Click Save Save File to your Desktop When the download completes click Open Extract the video to your Desktop Locate the file on your Desktop and double-click on the video file to watch.

Agree that it looks like a fun gift for a girl but not good for an adult. The designs are really adorable though. Thanks for doing an indepth review. Tad expensive but if it had actually worked well, I would have bought it lol. Thanks for sharing! Barbie was my favourite toy growing up- I was 16 before I stopped playing with her! This is so cute but it looks like a lot of work- especially for kids!

Thank you for your review, it was very helpful!! I have been looking for something to give to my little niece and I think I better off getting some cute nail polishes, as she loves doing her nails!