Who invented wire cutters

Early on, to strip wires, knives were probably used, then linesman pliers and finally wire cutters and manual wire strippers. Wood and has undergone many changes since then.

One such innovation came in and was also invented by Wood, this style continues today and is made by both Klein Tools and Ideal Tools. One squeeze and the wire practically strips itself. In addition to the compound automatic wire strippers, there are a few other styles of wire stripper that you can get.

Wiha also makes a few variations of this cutter as well. The last style of wire stripper that bears mentioning is the European style and you can get this made by Wiha, Knipex…and so on down the line. This style of wire stripper comes at the wire from the front as opposed to doing it from the side as other styles.

You can choose from a basic, manual style that works like pliers. The European and compound automatic style are also both popular styles that work well in various situations. Take a look at the wire strippers we sell and ask us if you have any questions about them! Save Saved Removed 0. A brief history of diagonal cutting pliers Shop for Diagonal Cutting Pliers Wire cutting tools, although around before, came into their own in America during the s.

Amazon Associate Partners. About Us. Privacy Policy. Contact Us. Shop for Diagonal Cutting Pliers. The most common cable cutter is the one-handed device that uses two steel blades and high leverage handles.

These cable cutters are either ratcheting or non- ratcheting. A crimping tool is a device used to conjoin two pieces of metal by deforming one or both of them in a way that causes them to hold each other. The result of the tool's work is called a crimp. A good example of crimping is the process of affixing a connector to the end of a cable.

Diags or Dikes a portmanteau of " Diagonal CutterS " is pronounced " dikes " — as in the phrase "a pair of dikes " or "hand me those dikes " — is jargon used especially in the electrical industry, to describe diagonal pliers. Dike can also be used as a verb, such as in the idiom "when in doubt, dike it out". A punch down tool , also called a krone tool , is a hand tool used to connect telecommunications and network wires to a patch panel, punch down block, keystone module, or surface mount box.

The " punch down " part of the name comes from punching a wire into place using an impact action. Hand Wire Splicing Technique. Add a section of shrink tubing ont o the wire. Don't forget this step… or you'll regret it after you've finished the splice. Rope splicing , joining two pieces of rope or cable by weaving the strands of each into the other. Eye splice , a method of creating a permanent loop in the end of multi stranded rope by means of rope splicing. Splice joint, a method of joining two members end to end in woodworking.

Technically, you 're not supposed to splice extension cords. Even if you solder the wires, wrap each wire with electrical tape and encase the whole splice in heat shrinkable tubing, it still won't have the abrasion resistance of a new cord.

Plus, it's not permissible under the National Electrical Code. The high voltage about volts effective, 60 Hz AC is supplied to the smaller prong of the standard polarized U.

It is commonly called the "hot wire ". If an appliance is plugged into the receptacle, then electric current will flow through the appliance and then back to the wider prong, the neutral.

Repair a Damaged Power Cord. A cut or damaged power cord will often mean a costly replacement of an otherwise-working tool or appliance. However, there are times when you can repair the cord yourself without replacing the entire tool.