What finish should i use on my table

Applying 3 or 4 coats may result in a build up of wax on the surface of the table top that can be easily marked, scuffed or scratched. Hard wax Oils are quick and easy to apply, maintain and repair. Clear oils tend to draw out the natural coloration of the timber which with Pine, can be a can be a yellowy brown or orangey brown colour. This can depend on the colour and type of finish desired. If a varnished finish is required, the table top can be stained with a water or solvent-based wood stain then over-coated with a highly durable wood varnish.

If an oil finish is preferred, there is the option of staining the table with a wood stain first then over-coating with a clear wood oil. Alternatively, there are a range of wood oil tints that colour and seal the table top in one process. Yes you can. Worktop oils such as Manns Premier Top Oil and Osmo Top Oil offer excellent durability and protection again liquid spillages, scuffs, knocks and stains.

They are very easy to apply, clean and maintain making them ideal for real wood table tops. This depends on the type of black finish required.

There are a number of ways to achieve a black table top finish but all will give a different depth of colour or sheen so doing test areas is the key to achieving the desired finish. For a deeper, darker black, the table top can first be stained with a black wood stain such as Manns Classic Pine Stain for softwood tables and Manns Classic Oak Stain for hardwood tables.

Once stained, the table top must be denibbed or lightly sanded to remove any powdery residue left over from the staining process. It should then be wiped over with a dry cloth or vacuumed to remove all traces of sanding dust. Do not wipe down with a damp cloth as this will remove some of the stain. Once dry, the stain can be over-coated with 2 thin coats of one of the black tinted wood oils mentioned above. The benefit of using wood oils is that whilst they are tough and durable, they are also easy to apply, maintain and if required repair should the finish get scuffed, scratched or marked in some other way.

Varnishes are available in a range of sheen levels and offer the best all-round protection. Another approach for a totally opaque finish is to use a black paint or varnish such as Manns Classic Interior Paint. It is common for Black and White wood finishes to produce a wide variety of effects so it is highly recommended to always carry out a series of test areas before starting any project.

This depends on whether durability or ease of maintenance is the top priority. Varnish is the more durable option but requires a longer maintenance period when it becomes damaged or worn. Old varnish coatings need to be sanded or stripped off before applying fresh coats. Wood oils such as Fiddes Hard Wax Oil and Osmo Polyx Oil are very durable, long lasting, easy to maintain and restore without having to strip off the old finish first.

Simply clean the table top with a dedicated Ph balanced wood cleaner and apply a fresh coat of oil. Normally used for commercial flooring, this product can be used on bar tops and table tops. It is extremely smelly and must be applied in a well ventilated environment, carefully following the manufacturer's instructions at all times. In a nutshell, ignoring to coat the upside and underneath of your wood will make it warp over time and ruin your kitchen table in the long run.

If you want to avoid any damage to the wood, it would be best to apply three layers. Doing this will also make the kitchen table durable, and it will be easy to revive the finish when you need to.

However, you should note that some finishes may need a bit more layers. Because the end grain will soak up more finish, you need to seal it to avoid a darker appearance than the face grain. Additionally, you can get some finish before you get on the end grain. This helps limit the amount absorbed when applying your main coat. Finally, you need to clean the white residue once you have sanded it.

This prevents any residue from getting caught up when applying the second coat and may remain for quite a long time. You can use polyurethane to seal your wooden kitchen table because they have been known as suitable sealers for quite a long time.

Besides, polyurethane prevents spilled milk, water, alcoholic beverages, and greasy food substances from finding their way into the wood. Kitchen table made from hardwood, such as teak, walnut, mahogany, oak, and maple, are very durable finish and can last years without wearing and tearing.

On the other hand, kitchen table made from composite are also strong but will not last longer than kitchen table made from hardwood.

There are ways many ways to waterproof your wooden table for a couple of years, but below are our most favorite ones:.

The other six finishes for the wood kitchen table are also excellent alternatives. Just make sure that you have carefully checked the buying guide before purchasing any finish. Save my name, email, and website in this browser for the next time I comment. Give your wooden kitchen table the high gloss finish it deserves. Sale 1, Reviews. General Finishes Arm-R-Seal Oil Based Topcoat, 1 Gallon, Semi-Gloss Arm-R-Seal topcoats are made with only the highest quality urethane resin These topcoats are extremely durable and long lasting They are formulated to be wiped on with a cloth or applied with a foam brush.

The Arm-R-Seal is a highly durable finish The formula is easy to wipe on application It delivers a natural look. The finish starts to yellow over time It takes ages to cure The formula can be harsh to wax coats beneath. Check Current Price. The special formula allows it to deeply penetrate wood pores within 5 minutes of application, resists lapping, and dries in two hours, making all your wood projects quick, beautiful and easy.

Wait minutes and wipe away excess stain. Reapply coats for deeper color. This classic brown stain looks great on a wide variety of projects. Since , we have been inspiring consumers to Keep on Finishing.

We offer consumers a complete line of products to meet every wood finishing need. In fact, the finish lends a slightly orange glow that may be more obvious on lighter woods. Because Arm-R-Seal is oil based, apply it in a well-ventilated area. It is also combustible and toxic while liquid, though food-safe when dry. Once dry, it normally provides several years of protection. The result is a hard, scratch- and stain-resistant finish. However, it allows for fuss-free cleanup.

Apply the finish with a synthetic brush, foam pad, or lambswool applicator. It can be recoated in 2 hours. For maximum protection, three coats are required.

Minwax oil-modified polyurethane finish is available as gloss, semi-gloss, or satin. Tung oil has been used to preserve wood for several thousand years; however, lower-quality products often contain additives and solvents. Apply it with a cloth, wiping in a little at a time, a method that allows the oil to penetrate and enhance the grain. Drying time takes about 12 hours, and several coats may be required to develop a protective sheen. Finished surfaces are protected from water, alcohol, and vegetable and fruit acids.

This product is not recommended for use on softwoods unless they are first sealed to prevent excessive absorption. A waxed finish brings natural warmth to furniture, has a pleasant feel, and smells good. Application is easy: Simply rub it in with a soft cloth, then buff it to an attractive sheen. While they can protect against day-to-day spills, hot beverages or pans will leave white rings.

It also can be used to spruce up brass, copper, marble, and a variety of other materials. Minwax Wipe-On Polyurethane delivers the appearance of a hand-rubbed finish—usually associated with waxes or oils—but with the toughness of polyurethane.

For example, say you have no more grit paper to use when you are only halfway finished with the initial sanding. You might want to jump into using the grit paper, but this is not a good idea. This will only create uneven treated areas and the stain will then also look different in areas.

Try not to go overboard with sanding. Many experienced woodworkers will tell you to quit at a grit paper when sanding coarse-grain woods such as oak. For fine-grain woods like maple, grit is the number to stop at. This applies only to the face grain, if you are sanding the end grain, which may show scratches, it is best to use sandpaper up to or grit.

The best finish for a wooden kitchen table is varnish, as it is durable and provides a clear finish. Water-based polyurethanes are best used when a clear finish is required over a deeper finish. If not, you can then use the oil-based polyurethane. But there are also many other pros and cons between the two that need to be considered.

The simple answer is yes. In many instances, the bare wood can sometimes not look very appealing. Also, applying a finish to the wood will increase its durability. Wood surfaces that have not been given a finish, especially if it is used a lot, will not last very long. Yes, a coat of polyurethane can be added as a finish over a painted surface. The one thing that is needed for successful results, is to prepare the painted surface before applying the polyurethane.

Yes, painting over varnished wood is okay, as long as the wood and the varnish are still in good condition. Since varnish creates a protective layer over the wood, the paint might have difficulty in adhering to the surface. You will then need to do some sanding and apply a primer before painting over the surface. If you do not want to sand the wood, you can use an oil-based primer, which adheres to a finished surface.

Remember, in every situation, the surface must be uncontaminated before painting over. Join our mailing list and receive your free Epoxy Resin eBook sample with 25 pages! Pros It provides a waterproof layer Simple application Provides durability Appearance is excellent. Cons Can be costly. Pros Has a waterproof finish Comes in various sizes The odor is not an issue Extremely durable.

Cons Has a long curing time May form bubbles. Pros Will last a long time and it is exceptionally durable Helps to prevent stains Variable application methods. Cons May produce a yellowing effect when applied over paint Sanding is required between layers Have to apply a number of layers. Finish Application You must work fast during application, as oil-based finishes could turn sticky in a few minutes, depending on the surrounding conditions. Water-based finishes dry quickly, so you will need all your equipment, and everything prepared before you begin.

Also, once you start, you cannot leave until everything is finished Applying oil-based finishes with a roll-on brush is a better option when it comes to larger surface areas.

The finish might appear horrible to begin with, but any bubbles will quickly disappear. You will be left with a clear and smooth surface, a much better result than when using a normal brush. Use lighter coats when using a roller brush to avoid any edges or issues when rolling back and forth.