Hdtv what do i need

Our ClearStream and Bowtie antennas are engineered to receive signals at a degree beam angle, meaning our antennas are best suited to provide TV signals from widely-spaced broadcast towers. Even with the best multi-directional antennas, facing the front of the antenna towards the largest cluster of towers optimizes your chances of achieving the best line-of-sight between your antenna and the transmitting towers, which will ensure you receive the most available TV channels for your location.

This simply means that in an ideal scenario, there is a direct, straight line between your TV antenna and the broadcast towers it is receiving signals from. The goal in practical applications is to achieve the most unobstructed path to the broadcast towers as possible.

Make certain the antenna is not aimed at physical obstacles such as a roof, building, or trees. You should also determine what type of antenna you need based on the terrain around your home, your location in relation to the local broadcast towers, and what channels are available in your area. Go to www. Remember to rescan for channels every time you move your antenna.

Give our Connection Crew a call or chat with us right here on our website if you need further assistance with a new or existing TV antenna installation. A: A bowtie antenna is another name for a UHF fan dipole antenna.

By using triangular elements instead of rods, the bandwidth is greatly increased, to cover the entire UHF band. Additionally, the mesh reflector of the bowtie is more efficient than the rod reflector. It is also lighter in weight and has less wind resistance. The Yagi was designed to improve the gain of the antenna concentrated in one direction.

The directivity is accomplished with added elements called directors and reflectors. The Yagi has high Gain, is very directional, and has a narrow bandwidth. In simple unidirectional antennas like the Yagi, frequency bandwidth is inversely proportional to antenna gain. One way to increase the frequency bandwidth of a simple antenna like a Yagi is to increase the diameter of the antenna conductors. The greater the conductor diameter, the wider the band with increased conductor diameter also has a second benefit, it increases the physical strength of the antennas.

A: Whenever you design an antenna for a narrower range of frequencies, you can expect dramatic improvements in performance. We are so confident our antennas will ensure the best possible signal reception, we back them with the best lifetime warranty in the antenna category. A: Every installation is different, which is why we ask that you contact our Connection Crew to provide you with individualized support. Connecting an antenna to multiple TVs is easier than it sounds.

Think of it like this: if your residence ever had satellite or cable TV service, the coaxial cable needed to distribute an antenna's signal throughout your home is already installed, you just need to find the right location to install your antenna. If you didn't have satellite service and are setting up an antenna for the first time, you will need a signal splitter, some coaxial cable, and probably an antenna mast.

Take a look at our illustration below for a visual guide. To cut the cord from satellite service, you can disconnect the coaxial cable from the dish that is sitting on your rooftop and remove the dish - throw it away, you won't need it anymore!

Using the antenna's mounting hardware all our attic and outdoor antennas include universal mounting hardware , install the antenna on the satellite's mast. Connect one of the coaxial cables from the dish to your TV antenna and remember to scan for channels. That's it! For assistance with splitting your antenna's signal to reach multiple TVs, give our Connection Crew a call or chat with us right here on our website.

We're available 7 days a week. A: In some areas, broadcast signals are strong enough that an amplifier is not necessary. If you are not receiving a clear picture on some channels, then install an amplifier with your antenna. For outdoor or attic antennas, installations with long cable runs ft. Call our Connection Crew or chat with us right here on our website if you need more information on using amplifiers, preamplifiers, or to get an evaluation of your location.

Available 7 days a week. A: Sometimes, for various reasons, it is necessary to install your antenna in the attic. Plus, if you have metal or aluminum-backed insulation in the walls or under the roof, the signal will most likely be blocked. You'll have to remove the insulation or install the antenna in a different place.

In addition, although the antenna is inside, you'll still need to make sure that your antenna is pointing toward your local TV broadcast towers. Visit antennapoint. A: For the best performance, we typically recommend placement of your TV antenna at the highest point available to you and with a clear line of sight to the broadcast towers to minimize the possibility of obstructions between your antenna and the broadcast towers it is receiving signals from.

Of course, many people still choose to install their TV antenna in the attic for aesthetic reasons or to comply with neighborhood guidelines. Where installation is possible, an outdoor TV antenna will offer the best opportunity for receiving TV signals. Outdoor TV antennas are traditionally mounted on a rooftop and have a distinct advantage over indoor and attic antennas, with better line-of-sight to the broadcast towers and fewer obstructions such as trees, buildings, walls, or roofing materials.

If you live a far distance from the broadcast towers, a long-range outdoor antenna is the best option for receiving the available TV signals. The law basically states that homeowner association covenants cannot prevent you from installing antennas or dishes. The rule "prohibits restrictions that impair the installation, maintenance or use of antennas used to receive video programming.

A: According to all current laws of physics here on Earth, no. Theoretically, under extremely rare circumstances, it would be possible if you lived on top of a mountain and the broadcast towers were also on a mountain, directly in front of you, exactly miles away. At normal elevations, however, the curvature of the earth limits effectiveness to pretty much 70 miles for UHF signals sorry, flat-earthers.

Learn more about how to cut the cord here! Converter boxes are sold at most retail stores or check on Amazon. With this screen resolution, you will see more detail and texture than you ever imagined possible. When the new ATSC 3. Our antennas are compatible with all the new features this standard has to offer, including content broadcast in 4K. This could occur more frequently as some channels begin to move to new frequencies learn more at www. It is important to understand that it is not about the HDMI 2.

The latest version of the connection is HDMI 2. The exception is if you want to run them at 4K, something only a few TVs can handle. In that case it's worth learning about Premium Certified cables , which don't cost that much more than noncertified cables. If you bought a 4K or regular Blu-ray player to go with your new TV, it will probably autodetect what your TV wants p or p and send it whichever is appropriate.

The same is true for a newer streaming box or game console. For older devices, or a cable or satellite box, make sure that it's set for video and set to output HD. Just because the cable box is capable of HD doesn't mean you're getting HD.

You need to pay your provider for HD channels unless they're included in your current package , and you sometimes need to tune to the specific HD channels. For example, with my provider, channel 2 is SD, whereas channel is HD. This is also true for Netflix and other streaming services. For example, with Netflix you can only get 4K if you're paying for the most expensive streaming tier.

Streaming sticks and boxes are easy to connect to TVs and usually set resolution and other details automatically. You can also get free HDTV with an antenna , and 4K over-the-air is already rolling out in many cities.

If you're trying to get sound from your TV to your soundbar or receiver, there are some specific steps you need to take. Regardless, if you bought a 4K TV, you may need to get a new receiver anyway. If you're looking to connect your 4K TV to a computer, here are some things to think about.

You can also connect your laptop to your TV wirelessly. When you tune to a HD channel your picture, if the TV is set to auto aspect or normal, will naturally fill the entire screen according to what the content was filmed in.

Keep in mind that some of the local networks HD channels will not fill the entire screen during the day on normal shows. If the show is filmed in HD format and you are on an HD channel it should fill the entire screen. This is normal since the box is having to change formats and tell the tv to also change formats. This is normal.

This is a problem easily fixed by you with the remote. First on the remote you need to press menu, then select the Home icon and hit OK. Next scroll down to setup may have to scroll all the way down off the page to find it and click OK.

Highlight Audio Setup and press OK. Next hold down the TV button on your remote for 6 seconds or until the light goes solid lights on the top of remote will start flashing and then the TV light will go solid. Account Access. Why Basic Cable? What is Digital Cable? What is HDTV? Contact Us Please enable JavaScript in your browser to complete this form.