How can recover ntldr missing

Here, if none of the solutions listed and described worked for you, it is safe to assume that the only thing that can resolve the "NTLDR is missing" error for you is a complete reinstallation of Windows. So, it is recommended to backup all needed data before reinstalling Windows. Copy Disk feature provided by MiniTool Partition Wizard can help to copy all partitions and data from one disk to another in several steps, as showing in the following.

Then, in the main interface of this professional tool, select the disk which needs copying and activate Copy Disk from the left action panel to clone MBR system disk to GPT. Next, select the disk that will save the copy of the source disk as the target disk and then click "Next.

The target disk should be large enough to hold all content on source disk, and you also need to backup all important data on this target disk in advance, because all its data will be deleted. Next, choose a suitable copying method to decide the layout of the target disk and then click "Next" button.

If you still receive the NTLDR is missing error after reinstalling Windows, you're most likely facing a hardware issue with your hard drive. In this situation, the only way you can do is to replace the damaged hard drive with a new one and then reinstall Windows. If you have other solutions to solve this issue, please share them with us by leaving comments below. Much appreciated! Download Partition Wizard.

Note: Make sure that the device you will select has boot files or Windows operating system files installed. Here, maybe, you can try the professional edition. Make sure that the latest revision for BIOS is installed on the computer.

Contact the computer manufacturer to inquire about how to obtain, and then install the latest BIOS update that is available for the computer. For information about how to configure and how to verify the correct BIOS settings for the computer, see the computer documentation or contact the manufacturer of the computer. To repair the Windows startup environment, use one or more of the following methods, as appropriate to your situation.

Create a Windows boot disk that contains the following files: Ntldr Ntdetect. Modify the Boot. For more information about how to create a boot disk, click the following article number to view the article in the Microsoft Knowledge Base: How to edit the Boot. Copy the Ntldr file, the Ntdetect. At the Welcome to Setup screen, press R to repair the Windows installation. Type the following commands, pressing ENTER after you type each one, where drive is the drive letter that you typed in step 4 of "Method 2: Use the Recovery Console," of this article:.

If you receive the following message, the Boot. Use a text editor, such as Notepad or Edit. Tim Fisher has more than 30 years' of professional technology experience.

He's been writing about tech for more than two decades and serves as the VP and General Manager of Lifewire. The most common reason is when your computer is trying to boot from a hard drive or flash drive that isn't properly configured to be booted from. In other words, it's trying to boot from a non-bootable source. This also would apply to media on an optical drive or floppy drive that you're trying to boot from.

Other possible causes include corrupt and misconfigured files, hard drive and operating system upgrade issues, corrupt hard drive sectors , an outdated BIOS , and damaged or loose IDE cables. If you receive an "NTLDR is Missing" error in one of these operating systems, especially early in the installation process, try starting the clean install process over again from scratch.

There are a few ways that the error may present itself, with this first one being the most common:. Restart your computer. The error could be a fluke. If you find that this is the cause of your problem and it's happening a lot, you might want to consider changing the boot order in BIOS so the hard drive with Windows installed is listed first. Check the hard drive and other drive settings in BIOS and ensure they're correct.

The BIOS configuration tells the computer how to use a drive, so incorrect settings can cause problems, including these errors. There's usually an Auto setting for the hard drive and optical drive configurations in BIOS, which is usually a safe bet if you're not sure what to do. Repair or replace the boot. Write a new partition boot sector to the Windows XP system partition. If the partition boot sector has become corrupt or isn't properly configured, you might receive the error.

Repair the Windows XP master boot record. NTLDR error messages may also appear if the master boot record is corrupt. Reseat all internal data and power cables. The error messages could be caused by loose or malfunctioning IDE cables.

Try replacing the IDE cable if you suspect it might be faulty. Update your motherboard's BIOS. Occasionally, an outdated BIOS version can cause the error.