Where is 552 area code

These phones are easily identified by the word "Meridian" on the sets. If the incoming call is on the first key, just lift the handset. If the incoming call is on any other key, lift the handset and press the button next to the flashing black triangle.

Press the key of an available line, lift the handset or if the line on key 1 is available, just lift the handset , then dial the last five digits of the desired telephone number. Example: to call , press the key of an available line, lift the handset, dial To store a number leave the handset on hook, press the "Auto Dial" key the black triangle will start flashing. Dial the number to be stored as you would dial it ex. To use: Press the key of an available line, lift the handset or if the line on key 1 is available, just lift the handset , press the "Auto Dial" key the number previously stored on that Auto Dial key will be automatically dialed.

To activate, press the "Forward" key the black triangle will start flashing on the dial, enter the five digit BC telephone number that you want your calls to forward to, then press the forward key again the black triangle will be solid indicating that Call Forwarding is active. To cancel, press the "Forward" key the black triangle will disappear indicating that Call Forwarding is inactive.

To activate, while on an active call press the "Hold" key located above the dial pad the black triangle of that line key will start flashing indicating that the line is on hold. Intercom lines do not forward if busy or not answered.

Press the key of an available line, lift the handset or if the line on key 1 is available, just lift the handset , dial , the last number dialed from that telephone set will automatically be re-dialed. To program a number: Leave the handset on hook, press the "Speed Call" key the black triangle will start flashing , enter a one digit storage location code on the dial pad, then enter the full number as you would dial it ex.

Repeat the above steps to change or enter additional numbers. To use: Press the key of an available line, lift the handset or if the line on key 1 is available, just lift the handset , press the "Speed Dial" key, then enter the one digit storage location code of the number you wish to call.

The number previously stored will be automatically dialed. The red triangle in the upper right hand corner of your telephone set will be lit. Important note: If you have two different phone numbers assoiciated with your phone, the red triangle indicates messages for the primary line only.

Lift the handset, if the line on key 1 is not available, press the line key of an available line, press the "Message" key, or dial , then login to your voicemail box. SIP phones plug into a network port instead of a phone port.

SIP phones include most of the features currently offered with non-SIP phones, as well as many new functions. You will be able to use the functions you are accustomed to using — you may have to use them a little bit differently. In addition to having many of the same phone functions Hold, Transfer, Conference, etc.

Your phone number will not change because you have a VoIP phone. SIP Basics Guide. SIP User Guide. This phone number will be active until the August following their graduation. You can dial to test your phone keys to verify that they are recognized as the "pound" and "star" key respectively.

Cordless phones are not recommended because of the large number of lines in such a small area, which can cause interference and static. A simple, inexpensive desk phone is sufficient for use in the residence halls. For undergraduate students living off campus, their BC phone number will serve as a voicemail box where they can receive messages.

If you don't hear a dial tone when you plug your phone into your jack, use a nearby phone and call from your mobile phone to report a phone jack problem. When you call, be prepared to provide your Eagle ID number, a phone number where you can be reached your roommate's, for example , and your EagleNet box number located on the left-hand side of the EagleNet box below the phone and computer icons.

On campus student phones have call waiting, call forwarding, and 3-way conferencing features at no additional charge. For some of these features, you will need to momentarily depress the switchhook or plunger where the handset normally rests. This is the same as briefly hanging up and will allow you to activate the desired feature.

While talking on the phone, you have the ability to answer a second call when you hear a short tone indicating another person is trying to reach you. Call Waiting allows you to put the first party on hold while you answer your second call. Allows you to have a conference call with two other parties.

With this service, you can initiate calls to both parties or add another party to an established call. You may conference any combination of on and off campus phone numbers. Calling cards are required for long distance calls. Members of the BC community are welcome to utilize either of these services by calling the reservation line at from on-campus. This line is monitored by our staff and messages will be returned promptly.

Because phone numbers are toll free in the same sense that phone numbers are, you may be wondering why an number is used at all. Telemarketers are notorious for targeting businesses in hopes to scam employees and levy unfounded complaints for mislabeled phone numbers.

A prefix of represents calls that are paid for by the recipient, rather than the caller. When people think of toll free calling, they usually think of numbers, but there are many other options that function in the same way. The ping call phenomenon involves the victim receiving a call on their mobile phone. The caller hangs up before they answer.

Since the number often appears to be local or from the same country as the victim, more often than not, they will call the number back. This is often a one digit code preceding local city code. This code is used only nationally, but If you are telephoning a number in another country, then you must omit this code. This 0 is the NDD prefix. This is the national prefix needed before you can dial a number in another country; and often is followed by the city or area code.

Libya's code is This code is needed to dial a number in another country, and is often followed by the country code and then the city code.