2006 predator 50 manual

->>>> Click Here to Download <<<<<<<-

Apply the front brakes gradually right lever. When fully stopped, apply the rear brake as well left lever and then lock the parking brake. If you begin rolling backwards: Keep weight uphill. Never apply engine power. Never apply the rear brake while rolling backwards.

If the tires regain traction unexpectedly, the ATV could overturn. Avoid operating over large obstacles such as rocks and fallen trees when possible.

If equipped with racks, cargo should be properly distributed and securely attached. Page 74 Driver Warnings After a rollover or an accident, have a qualified service dealer check the complete machine including, but not limited to, brakes, throttle and steering for possible damage.

Safe operation of this rider active vehicle requires good judgement and physical skills. Persons with cognitive or physical disabilities who operate this vehicle have an increased risk of overturns and loss of control which could result in severe injury or death.

Page 75 Never modify the ATV through improper installation or use of accessories. All parts and accessories added to the vehicle must be genuine Polaris Industries Inc. Remove the spare key and store it in a safe place. If both keys are lost, see your Polaris dealer. This switch is operated with a key and must be turned clockwise to the ON position before starting the engine.

Leaving the keys in the ignition can lead to unauthorized use of the vehicle resulting in serious injury or death. The engine will not start or run when the stop switch is down, in the OFF position. Its purpose is to provide the operator with a quick means of engine shutdown in case of stuck throttle or other emergency. Turn the key to the ON position, set the parking brake, push the start button up to the ON position and press the start button. Page 82 Features and Controls Throttle Controls Operating an ATV with sticking or improperly operating throttle controls could cause an accident and lead to severe injury or death.

Never start or operate an ATV with a sticking or improperly operating throttle. Always contact your dealer for service if throttle problems arise. Failure to check or maintain proper operation of the throttle system can result in an accident if the throttle lever sticks during operation. Page Throttle Lever Throttle Lever Engine speed and vehicle movement are controlled by pressing the throttle lever A.

The throttle lever is spring loaded. Engine speed returns to idle when the lever is released. Page 84 Features and Controls Brakes To activate the rear brake, squeeze the lefthand lever A toward the handlebar. The front brakes are activated by squeezing the lever B on the righthand handlebar.

Applying only one brake could cause loss of control and result in serious injury or death. Page 85 Brakes Setting the Parking Brake 1. Squeeze the lefthand brake lever A. Push the park brake lock B down. This will prevent the lever from returning to the released position. To release the parking brake lock, squeeze and release the brake lever. The parking brake will release automatically. Always lock the park brake before starting the engine. Always lock the parking brake whenever the vehicle is left unattended.

Since the transmission is always in forward gear, activating the throttle to warm the engine will make the machine move forward if the park brake is not locked.

Your model has a low oil warning light. When the red dot is illuminated, it means the oil level is getting too low. Always exercise extreme caution whenever handling gasoline. Always refuel with the engine stopped, and outdoors or in a well ventilated area. Do not smoke or allow open flames or sparks in or near the area where refueling is performed or where gasoline is stored. Operate this vehicle only outdoors or in well-ventilated areas. Gas Cap The fuel tank filler cap A is located directly below the handlebars.

Page 90 Always return the valve to the ON position after refueling. This filter should be replaced by your dealer after every hours of operation or annually. Do not attempt to clean the fuel Page Oil System Oil System Mixing brands or using a non-recommended oil may cause serious engine damage. Never substitute or mix oil brands. To avoid serious engine damage, always top off the oil level when refueling. Page 92 Features and Controls Kick-Start Lever If the battery becomes too weak to start the engine, the kick-start lever will allow you to start the engine until the battery is serviced.

Be sure the ATV is on a level surface with the parking brake locked. Page Footwell Riser Footwell Riser The removeable footwell risers on the Predator 50 improve riding ergonomics and provide comfort for shorter operators. An operator will also have better control of the ATV when both feet can remain firmly planted on either the footwells or the risers.

No single action on your part is as important as following the procedures for a proper break-in. Page 95 2. Fill the oil tank with Polaris-recommended oil. NOTE: Always be sure to top off the oil level whenever refueling. Drive slowly at first. Select an open area that allows room to familiarize yourself with vehicle operation and handling. Use the following checklist to make sure the ATV is in proper working condition before each use.

Page 97 6. Engine stop switch - Check for proper function. Wheels - Check for tightness of wheel nuts and axle nuts; check that axle nuts are secured by cotter pins. Drive chain - Condition and slack; refer to drive chain adjustment. Page Starting The Engine Starting the Engine Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness resulting in severe injury or death.

Never run an engine in an enclosed area. Operating the ATV immediately after starting could cause engine damage. Allow the engine to warm up for several minutes before operating. The choke is off when the lever is pushed completely to the right.

The choke can be adjusted gradually, depending on how much choke is needed for starting. ATV riding requires special protective clothing for comfort and to reduce the chance of injury. Helmet Your helmet is the most important piece of protective gear for safe riding.

Page Driving Safely 2. Eye Protection Do not depend on sunglasses for proper eye protection. A pair of goggles or a helmet face shield offer the best protection for your eyes. They should be kept clean and be of shatterproof design bearing the markings z2.

Sit upright with both feet on the footrests and both hands on the handlebars. Start the engine and allow it to warm up. Check your surroundings and determine your path of travel. Release the parking brake.

This means that the wheel on the outside of the turn must travel a greater distance than the inside wheel when turning and the inside tire must slip traction slightly. Page Driving On Slippery Surfaces Driving Safely Driving on Slippery Surfaces Failure to exercise care when operating on slippery surfaces can result in loss of tire traction and cause loss of control, accident, and serious injury or death.

Never apply the brakes during a skid. Do not operate on excessively slippery surfaces. Page Whenever riding on slippery surfaces such as wet trails or loose gravel, or during freezing weather, follow these precautions: 1.

Slow down when entering slippery areas. Maintain a high level of alertness, reading the trail and avoiding quick, sharp turns, which can cause skids. Improper procedure could cause loss of control or overturn and result in serious injury or death.

Page Whenever traveling uphill, follow these precautions: 1. Always travel straight uphill. Keep both feet on the footrests. Transfer your weight forward.

Proceed at a steady rate of speed and throttle opening. Page Driving Across Hillsides Driving Safely Driving Across Hillsides Improperly crossing hills or turning on hills can result in loss of control or vehicle overturn, resulting in severe injury or death. Avoid crossing the side of a hill when possible. Page Sidehilling can be a dangerous type of driving and should be avoided if at all possible.

If you do enter into a situation where sidehilling is necessary, follow these precautions: 1. Slow down. Lean into the hill, transferring your upper body weight uphill while keeping your feet on the footrests. Page 4. Staying uphill of the ATV, turn the handlebars full left. Drive directly downhill. Transfer your weight to the rear of the vehicle.

Apply the front and rear brakes at the same time, and very slightly, to aid in slowing. Excessive speed can cause loss of control and lead to serious injury or death.

Turn the engine off. Set the parking brake. Always block the rear wheels on the downhill side as shown in the illustration. The recommended maximum depth for your ATV is below the bottom of the footrests A. Follow these procedures when operating through water: 1. Determine water depths before driving through water. Page Avoid operating your ATV through deep or fast flowing water. The following areas need special attention: engine oil, gearcase oil, front and rear gearcases and all grease fittings.

Be constantly alert for hazards such as logs, rocks and low hanging branches. Severe injury or death can result if your vehicle comes in contact with a hidden obstacle. Not all obstacles are immediately visible. Page Hauling Cargo The Sportsman 90 was designed to carry a certain amount of load. Never carry cargo on a Scrambler. When operating over rough or hilly terrain, reduce speed and cargo to maintain stable driving conditions. Unse- cured loads can create unstable operating conditions, which could result in loss of control of the vehicle.

Carrying loads high on the racks raises the center of gravity of the vehicle and creates a less stable operating condition. Operating this ATV on U. Page Maintenance S Routine maintenance is the responsibility of the owner. Always follow recom- mended maintenance procedures. See your dealer! S The PVT housing must be securely in place during operation. To clean the PVT filter: 1.

Remove the screws and the crankcase cover. Remove the screws and the filter cover. The sealing strip cannot be removed. Never add water to this type of battery. Keep the battery terminals and connections free of corrosion. If cleaning is necessary, remove the corrosion with a stiff wire brush. Wash with a solution of one tablespoon baking soda and one cup water.

Page Maintenance Battery Battery Removal 1. Disconnect the hold-down straps securing the electrical box and battery in position. Disconnect the black negative battery cable first.

Disconnect the red positive battery cable next. Lift the battery out of the ATV. Set the battery in its holder. Connect and tighten the red positive cable first.

Connect and tighten the black negative cable last. Attach the hold-down strap. Verify that cables are properly routed. Page Periodic Maintenance Schedule Inspect, clean, lubricate, adjust and replace parts as necessary. When inspection reveals the need for replacement parts, use genuine Polaris parts available from your Polaris dealer. NOTE: Service and adjustments are critical. Page Maintenance Chart Key miles.

Perform all services at whichever reading is reached first. Improperly performing the procedures marked with a failure and lead to serious injury or death.

Have an authorized Polaris dealer perform these services. Maintenance Chart Key Perform these operations more often under severe use, such as in dirty or wet " Page Lubrication Recommendations 4. Lube Method Fill oil tank. See Page Page Polaris premium 2-cycle oils will mix with each other, but we recommend that you choose only one of the oils and use it exclusively through the life of the unit. Never mix Polaris 2-cycle oils with any other brand of oil, including Polaris Nature Oil Biodegradable oil.

We recommend the continued use of this oil. Page Maintenance Periodic Maintenance Record Use the following chart to record periodic maintenance. Servicing Dealer or Person Remarks Page Handlebar Adjustment Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can cause limited steering or loosening of the handlebars, resulting in loss of control and possible serious personal injury or death.

Follow the adjustment procedures exactly, or see your Polaris dealer for service. Page Handlebar Adjustment The handlebars can be adjusted for rider preference. Remove the pod to access the handlebar bolts. Loosen the four bolts A. Adjust the handlebar to the desired height. Be sure the handlebars do not hit the gas tank or any other part of the machine when turned fully to the left or right. Page Front Wheel Hub Tightening ft. Front Wheel Hub Tightening Front wheel bearing tightness and spindle nut retention are critical component operations.

Polaris Youth ATVs have an electronic speed control system and an adjustable throttle limiting screw. Adjust speed by removing or installing the jumper on the CDI A. With the jumper Use the following procedure to control how far the throttle opens.

Page Steering Inspection Severe injury or death can result from improper toe alignment and adjustment. Do not attempt to adjust tie rod alignment. All tie rod adjustments should be performed by an authorized Polaris dealer. Use the following procedure to check the toe alignment of the vehicle. Page Camber And Caster 3. Camber and Caster The camber and caster are non-adjustable.

If adjustment is required, turn the adjustment nut B until the freeplay falls in to the acceptable limit. Brake Freeplay Model Predator Refer to the specifications chart on page for the acceptable range of freeplay. To adjust the front brake freeplay, turn the adjustment knob B. To adjust the rear brake freeplay, turn the adjuster nut C. If the ATV is ridden in wet or dusty conditions, clean the filter more often.

Remove the screws A on the airbox and remove the filter B. Page Maintenance Immediately check the spark plug for correct color.

Using non-recommended spark plugs can result in serious engine damage. Always use Polaris-recommended spark plugs. A hot exhaust system and engine can cause serious burns. Wear protective gloves when removing a spark plug for inspection. By colin james. This is the factory service manual for the polaris predator download all chapters for complete manual. Or just the sections you need.

Released February 12, You may only provide a review once you have downloaded the file. There are no reviews to display. By Fittzy , February 26, By John Torbus , August 12, By Mo Salem , September 14, By Trevor B , September 8, By colin james , April 7, By rafal Started 20 hours ago. By Richard Started 14 hours ago. By Spade Started 21 hours ago. Not a member? Polaris ATV. Join our Forum! Sign in with Facebook.