Easy install vertical blinds

->>>> Click Here to Download <<<<<<<-

We know the idea of installing a new window treatment can be a bit intimidating, so we make it as easy as possible on you. Here are four ways we can help you take the headache out of hanging your new blinds or shades. Nothing is easier to install than our Simple Fit Pop-in Shades.

These cellular shades can be installed in just seconds. Gain a Know-How If you install your own blinds, the know-how you gain will be indispensable when it comes to troubleshooting minor problems.

You will be amazed at how much confidence you gain after a successful installation. You are also likely to get plenty of help from your retailer or manufacturer. There are numerous user-generated videos available online which provide valuable practical tips. Do some homework before you start and you will do all right. Satisfaction The satisfaction of getting a job done well is unparalleled. Along with that, you will also get the satisfaction of getting the blind fitted exactly where you want it.

Blinds generally mount on brackets. The position of your bracket will be determined by the structure and size of your window, along with the blind type you have selected.

With a Drill Blinds usually go in brackets. The brackets need to go on walls, window or door frames. In order to do this, you need a drill, a screwdriver, a pencil and some drill bits. With Screwdriver Some blinds can be fitted with the help of just a screwdriver and a pencil. Some blind frames come with pre-drilled holes. All you need to do is put the screws in with the screwdriver. Without any Screwdriver or Drill Some shades come with adhesive strips, magnetic headrails, Velcro strips, and so on.

With these you just need to position the blinds or shade on the window and lock it in place. Follow three or four simple steps and you will be done in a few minutes. However, you have to double-check your positioning to make sure you get it absolutely right. Getting the blinds out to reposition them might not be possible in most cases. Roller blinds are undoubtedly most easy to fit.

They come with minimum hardware. You just need to decide where to put them. Inside mount will give a neat look, but can get in the way of operations. How to Install Outside Mount Vertical Blinds If you measured for outside mount vertical blinds, follow these simple installation steps: From the point at the bottom of your window where your blinds will hang, measure up to the top of your window the length of the blinds you have ordered. Make a mark at the top of the measurement and center your head rail on the mark.

Use a pencil to make a mark 3 inches in from each end of the headrail. Align the top of your left bracket along the inside of the pencil line and fasten to the wall with the supplied screws. Repeat on the right side, as well as for any additional brackets. Make sure the brackets are aligned and level. Hook the front of your head rail into the brackets and push up on the backside until it snaps into place.

To install the vanes or louvers, pull the cord to space the vane stems evenly, then use the chain to rotate until the openings are facing you. Attach the first vane by gently sliding it up into the plastic stem until it snaps into place. Insert the valance ends into the corners of the valance and attach to the front.

Attach the included valance clips onto the headrail and slide the valance onto the clips. Test your new blinds.