Vw 6 disc cd changer manual

->>>> Click Here to Download <<<<<<<-

Multi-pin connector 3, pin, for telephone and microphone signals 1 — Microphone input, negative 2 — AUX output, audio, right 3 — AUX output, common signal earth 4 — Microphone output, negative 5 — Telephone audio input signal left, negative 6 — Telephone audio input signal right, negative 7 — Microphone input, positive 8 — AUX output, audio, left 9 — Microphone output, positive 10 — Telephone mute mute switch for radio 11 — Telephone audio input signal left, positive 12 — Telephone audio input signal right, positive 5.

ALPHA only tuner. DG RC2 DC RC4 DC RC1 DC DGF E HCAH29W HA3XTW TDA x 2. AM or 93C XS4B5A TDAB x 2. HAEE3W HAF9RW HAD7HW or FA5LLW TAP x 2. TDA x 4.

TDAQ x 2. TAH x 2. TDAAQ x 2. M smd. AT smd. HAD7HW HD5E1W TA x 2. MB90FA K FIS A FIS FIS A02 or A FIS D D70F D70FYGC DY M95C smd. Use the Vehicle Diagnostic Tester to get the anti-theft code. The radio card and the label on the radio that were used in the past are no longer used. The Vehicle Diagnostic Tester must be "online" connected to the network in order to get the anti-theft code and the user must be authorized to access radio codes.

In this case, enter the serial number manually. The serial number can be found on a sticker on the unit and is also stamped into the side of the unit. If the wrong code number was entered when overriding the electronic lock, first "SAFE" blinks in the display and "" appears again.

The entire procedure can now be repeated one more time. The number of tries is shown in the display. If you enter the wrong code again, the unit is locked for about one hour, meaning it cannot be operated.

This lock is indicated by the word "SAFE" appearing continuously in the display. After one hour has passed in which the unit and the ignition must be switched on, the number of attempts disappears and the electronic lock can be deactivated again as described above.