Symbol mc9090 manual

->>>> Click Here to Download <<<<<<<-

The modular keypads can be changed in the field as necessary to support specialized applications. The MMC is located under the keypad see Figure on page Replace the keypad and re-attach using the two screws see Figure on page Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement. Page Four Slot Ethernet Cradle Accessories 6 - 7 The amber spare battery charging LED on the cradle see Figure on page shows the status of the spare battery charging in the cradle.

See Table for charging status indications. Batteries usually charge in less than four hours. Page Battery Charging Indicators Do not place coins, keys or paper clips in cradle well. This is a Microsoft security feature to prevent connection to two networks at the same time. The mobile computer begins charging automatically. Page Universal Battery Charger Ubc Adapter To remove the battery, press the battery release and lift battery out of the well.

Page Accessories 6 - 19 The battery usually charges in three hours. Lithium-ion battery Ensure battery is installed properly. If the itself off. Page Bluetooth Connection Verify that the unit is loaded with a scanning application. See the does not accept scan is not loaded. System Administrator. Unreadable bar Ensure the symbol is not defaced. Distance between Ensure mobile computer is within proper scanning range.

When trying to The phone remembers the Manually delete the pairing device and name from the phone. Tap the wireless LAN icon from the systray. It can take up to four recharging. Ensure mobile computer is battery is not removed from CAM or attached correctly. Ensure mobile computer is battery is not removed from MSR or attached correctly.

Verify Dialing Patterns are correct for the incorrect. Use of alternative power supply will invalidate any approval given to this device and Magnetic Stripe Reader MSR may be dangerous. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Page Glossary Glossary Numeric It specifies an over-the-air interface between a wireless client and a base station or between two wireless clients.

Operates in the 5 GHz frequency range 5. The 5 GHz frequency band is not as crowded as the 2. Page Bar Code Density. The number of characters represented per unit of measurement e. Bar Height. The dimension of a bar measured perpendicular to the bar width.

Bar Width. Thickness of a bar measured from the edge closest to the symbol start character to the trailing edge of the same bar. Page Character Set. Those characters available for encoding in a particular bar code symbology.

Check Digit. A digit used to verify a correct symbol decode. The scanner inserts the decoded data into an arithmetic formula and checks that the resulting number matches the encoded check digit. Check digits are required for UPC but are optional for other symbologies. Page COM port. Communication port; ports are identified by number, e. Continuous Code. A bar code or symbol in which all spaces within the symbol are parts of characters. There are no intercharacter gaps in a continuous code.

The absence of gaps allows for greater information density. Page Glossary - 5 EAN. Element dimensions are specified metrically. EAN is used primarily in retail. Extensible Authentication Protocol A general authentication protocol used to control network access. Many specific authentication methods work within this framework.

Page Glossary - 6 MCX Mobile Computer User Guide use simple mathematical calculations to broadcast information that is translated as longitude, latitude and altitude by Earth-based receivers. Page Glossary - 7 group determines which characters are encoded. This continuous code type uses no intercharacter spaces.

Internet Protocol Address. See IP. Page Mobile Computer. In this text, mobile computer refers to the Symbol Series wireless portable computer.

It can be set up to run as a stand-alone device, or it can be set up to communicate with a network, using wireless radio technology. Measurement of the contrast brightness difference between the bars and spaces of a symbol. A minimum PCS value is needed for a bar code symbol to be scannable. Page Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are: 1. Light source laser or photoelectric cell - illuminates a bar code.

Page Symbol Aspect Ratio. The ratio of symbol height to symbol width. Symbol Height. The distance between the outside edges of the quiet zones of the first row and the last row. Symbol Length.

Length of symbol measured from the beginning of the quiet zone margin adjacent to the start character to the end of the quiet zone margin adjacent to a stop character. It allows a user at a terminal or computer to log onto a remote device and run a program. Page Glossary - 13 Warm Boot. A warm boot restarts the mobile computer by closing all running programs.

All data that is not saved to flash memory is lost. Wireless Application Protocol A set of specifications, developed by the WAP Forum, that lets developers using Wireless Markup Language build networked applications designed for handheld wireless devices. Page Index Numerics power connection Page Index - 3 display backlight intensity Patent and Trademark Office.

All other product or service names are the property of their registered owners. This manual is also suitable for: Mck Mcx. Print page 1 Print document pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? Sign up! Restore password. Procedures common to the MCX series of products are referenced to the.

NOTE Screens and windows pictured in this guide are samples and may differ from actual screens. The following documents provide more information about the MCX mobile computers. If an equipment problem occurs, contact the appropriate regional Symbol Support Center for contact information.

Before calling, have the model number, serial number and several bar code symbols at hand. Call the Support Center from a phone near the scanning equipment so that the service person can try to talk through the problem. If the equipment is found to be working properly and the problem is symbol readability, the Support Center will request samples of bar codes for analysis at our plant.

If the problem cannot be solved over the phone, the equipment may need to be returned for servicing. If that is necessary, specific directions will be provided. NOTE Symbol Technologies is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty.

For service information, warranty information or technical assistance contact or call the local Symbol Support Center:. This chapter lists the accessories for the mobile computer and explains how to install and charge the batteries, replace the strap and start the mobile computer for the first time.

This includes instructions for powering on and resetting the mobile computer, entering and capturing data. Scan Button. Mobile 5. Windows Mobile. Power Button. Carefully remove all protective material from around the mobile computer and save the shipping container for later storage and shipping. Inspect the equipment for damage.

If any equipment is missing or damaged, contact the Symbol Technologies Support Center immediately. See page ix for contact information. Table lists the accessories available for the MCX:. The main battery can be charged before or after it is installed. Use one of the spare battery chargers to charge the main battery out of the mobile computer , or one of the cradles to charge the main battery installed in the mobile computer.

Before using the mobile computer, install a lithium-ion battery by sliding the battery into the mobile computer as shown in Figure NOTE Ensure the battery is fully inserted. Two audible clicks can be heard as the battery is fully inserted. A partially inserted battery may result in unintentional data loss.

Figure Installing the Main Battery. Before using the mobile computer for the first time, charge the main battery until the amber charge indicator light remains lit see Table on page for charge status indications.

The main battery fully charges in less than four hours. The mobile computer is also equipped with a memory backup battery which automatically charges from the main battery whether or not the mobile computer is operating or is in suspend mode. The memory backup battery retains data in memory for at least 30 minutes when the mobile computer's main battery is removed or fully discharged.

When the mobile computer is used for the first time or after the memory backup battery has fully discharged, the memory backup battery requires approximately 15 hours to fully charge. Do not remove the main battery from the mobile computer for 15 hours to ensure that the memory backup battery fully charges. If the main battery is removed from the mobile computer or the main battery is fully discharged, the memory backup battery completely discharges in several hours.

When the main battery reaches a very low battery state, the combination of main battery and backup battery retains data in memory for at least 72 hours. NOTE Do not remove the main battery within the first 15 hours of use. If the main battery is removed before the backup battery is fully charged, data may be lost. For detailed cradle setup and charging procedures refer to the. For detailed snap-on setup and charging procedures refer to the.

For detailed spare battery charging accessories setup and charging procedures refer to the MCX User Guide. NOTE To achieve the best battery life in mobile computers with multiple radios, turn off the radios that are not being used. Ensure the accessory used to charge the main battery is connected to the appropriate power source. Insert the mobile computer into a cradle or attach the appropriate snap-on module.

The mobile computer starts to charge automatically. See Table for charging indications. Ensure the accessory used to charge the spare battery is connected to the appropriate power source. The battery starts to charge automatically. The amber charge LED on the accessory lights to show the charge status.

Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Symbol Technologies. Table of Contents vii. A-1 Mobile Computer A-1 Modem Module A-6 Mobile Computer Pin-Outs B-1 Keypad The EU configuration is pre-set to comply with the EU regulatory specifications.

The currently installed SymbolRoam version information is displayed. NET 2. If the surface of the RFID reader becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution. The accessory Page Accessories Do not place battery into a microwave oven or dryer.

See Service Information on page i-xii for contact information. Lithium-ion battery Ensure battery is installed properly. If the RFID off. See the not accept scan input. System Administrator. Page Appendix A: Technical Specifications The following table summarizes the reader technical specifications. Gen2 tags Laser Decode Capability Antenna Integrated, circularly polarized, 1. Page Index Index application security Page 93 Index - 3 remote API Patent and Trademark Office.

All other product or service names are the property of their registered owners. Print page 1 Print document 96 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? Sign up!

Restore password. Upload manual. Upload from disk.