Bissell healthy home manual

Page Brush Maintenance Do not attempt to disassemble the vacuum foot or to remove the brush roll. If you feel it needs to be checked or replaced, call bISSEll consumer Services or visit the website to locate an authorized service centre. Belt maintenance Unplug cleaner from electrical outlet. Recline handle for easier access to light bulb and remove screw to lift off lens. Remove the bulb by grasping bulb and pull- ing straight out of the socket.

Install the new bulb by pushing gently into the socket until the bulb snaps into place. TurboBrush maintenance the turbobrush should be checked regularly for clogs or debris wrapping around the brush. Remove tool from hose or front of vacuum. Twist collar so opening is at the top and lift top cover to remove.

Remove the brush from the belt and clean debris. Page Troubleshooting roubleshooting to reduce the risk of electric shock, turn power off and discon- nect polarized plug from electrical outlet before performing maintenance or troubleshooting. Power cord not plugged in 1. Check electrical plug 2. Thermal protector activated 3. Allow cleaner to cool for 30 minutes, see pg. Page Please Do Not Return This Product To The Store If you should happen to need assistance during assembly or operations, call please do not return this product to the store for any questions or concerns, bISSEll is happy to be of service.

It provides proof of date of purchase in the event of a warranty claim. While not all of these parts may have come with your specific model, they are avail- able for purchase if desired. This manual is also suitable for: Healthy home series Healthy home series Healthy home series. Print page 1 Print document 21 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? Sign up! Restore password. Upload manual. Upload from disk.

Always connect to a polarized outlet one slot is wider than the other. Unplug from outlet when not in use and before conducting maintenance. Do not run appliance over cord. Keep cord away from heated surfaces. To unplug, grasp the plug, not the cord.

Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow. Unplug from outlet when cleaning or servicing. To reduce the risk of electric shock, this appliance has a polarized plug one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet.

Do not change the plug in any way. Slide upper handle into lower handle by pushing forward. Insert two long screws into the holes marked with arrows and tighten both until snug. Attach hose rack by placing the rack over the center back portion of the vacuum. Be sure to feed the power cord through the hole in the center of the rack. Line up.

Tighten both until snug. Attach hose by placing the tabbed end into the lower left opening on corded side of the vacuum. Make sure the tab on the hose cuff and the hole in the vacuum line up. Place the working end of the hose into the hole on the side with the extension wand guides. Arrange the hose so it lays between the vacuum and the rack. Store the TurboBrush on the front of the handle by aligning the slot on the bottom with the tab on the handle.

Snap into place. Store the Combination Brush in the slot shown. Make sure the crevice tool is inside the extension wand. Store tools on vacuum as shown. Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. Use the handle on the front to carry the cleaner or place the cleaner in the upright position and tip back to roll on the rear wheels. The upper and lower cord wraps rotate to allow for quick and easy removal of the power cord.

Note: The rotating brush will not turn unless the unit is in the reclined position and the brush switch is on. Use your foot to pull the handle release pedal back to recline the vacuum cleaner. There are seven height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting.

Lowest setting — For low pile carpets or bare floors. For large items it may be necessary to move up one setting. Medium settings — For medium pile carpets. High setting — For high pile and most shag carpet. Note: For optimal cleaning performance, adjust to the lowest practical setting.

If your cleaner is difficult to push, adjust to the next higher setting.