Windows xp install mbr

In ordinary circumstances, GPT is better for new computers, so it is more common to use it in Windows On the other hand, if you have an old computer with a disk with a short storage capacity, MBR may be a better option. On the other hand, if you don't want to use the MBR partition as a boot partition then you should be able to use it without any problem on EFI systems. Under normal circumstances yes. Unless you have an old computer, UEFI is a better option not only because it is a newer and updated boot mode, but it is faster, and thanks to GPT layout, supports an infinite number of partitions, supports disks larger than 2TB and has more advanced features of safety that protect your information and devices.

Generally rated 4. To the point and solved my problem. Are you getting the Windows cannot be installed to this MBR disk error? Read this guide to resolve the issue and format the drive in the GPT partition style. Download Win Download Mac. Theo Lucia. Hard drive won't boot?

Fix it What if a disk unallocated? You Might Also Like. Other popular Articles From Wondershare. Theo Lucia chief Editor. Saima Ghumman ON Wait while Windows XP starts the installation process. Do not press the function key even when prompted.

Select each window by entering the number that matches the correct option during installation, and then press Enter. You can only buy one. The fixmbr utility creates a master boot record on the specified hard drive from which you are currently booting Windows XP. This will fix any damage that may have been corrupted in the Master Boot Record. Assuming the only problem you prefer is a corrupted and reliable Master Boot Record, Windows XP should boot fine here. If your netbook does not start normally, you will receive an error message similar to the following:.

What do you see, MBR? This is the first sector on the hard drive and basically indicates that this BIOS is looking for your current operating system on your current computer. If mbr is faulty, your device will not start. If you want to repair the MBR, you need to restart your computer normally. Here are the most detailed steps: 1. If you do not receive this message, you will need to configure your BIOS and use the boot menu to make sure you are booting from the CD.

After the Recovery Console packages, select the Windows installation you want to repair. If there is only one Windows installation listed, click 1. After selecting the installation, press Windows Media Channels and then enter the administrator password. By default, the administrator information is blank.

All of your data, applications, settings, etc are still intact on the drive and once the MBR is fixed, the computer will load normally. When prompted, boot from the CD drive by pressing any key. If Windows loads automatically, you will first have to enter the BIOS setup and change the order of the boot devices to start with the CD drive.

Once the setup loads, you will see the option to press R to repair a Windows installation. Once the Recovery Console loads up, you will have to type in a number that corresponds to your Windows installation. This is normally just 1. Press Enter and then type in the Administrator password. Now at the prompt, type in fixmbr. Your damaged MBR will now be replaced with a new master boot record and your computer should now be able to boot properly.

Note that you may also want to run the fixboot command to repair the boot sector with a new one. Also, make sure you only use these commands on a system with one operating system installed. If you have more than one operating system installed, fixmbr and fixboot could mess up everything. In Vista, the procedure to fix the master boot record is a bit different.

You have to start up Vista in the Recovery Environment and then run the bootrec command.